Short term we are working on memory compatibility. Long term is:
Optimizations and newer AGESA code integration from AMD.
P state overclocking?!
Resolving / splitting up IOMMU groups.
What else do you guys wanna see?
Great news! Is there any hope on running dual rank 2x8GB at 3200?
We also definitely need the option to bypass Fast Boot on next boot after power loss (which was included in previous GIGABYTE boards)
Also, Matt, can you hear me out? Do you have any information on the audio crackling that's haunting front panel jacks on X370 Gaming 5? From what I gather many people are experiencing crackling on the front audio panel. Is this something that can be fixed with software or should we RMA the boards?
Edited Apr 12, 2017 12:27:24 GMT -8 by fffurkandeger
Short term we are working on memory compatibility. Long term is:
Optimizations and newer AGESA code integration from AMD.
P state overclocking?!
Resolving / splitting up IOMMU groups.
What else do you guys wanna see?
Glad to hear memory compatibility is on top of the list. Some time ago you mention the system instability (or non-functioning) when set to high memory speed might cause by CPU instead (i.e. depend on silicon lottery), is it still the case? How could one identify the issue without having dozens of CPU on hand to try.
In layman's term, my memory kit is not working as fast as it should be, should/could I wait for BIOS update to solve the issue or should I sell my CPU now and reroll the dice?
Short term we are working on memory compatibility. Long term is:
Optimizations and newer AGESA code integration from AMD.
P state overclocking?!
Resolving / splitting up IOMMU groups.
What else do you guys wanna see?
Better Memory Compatibility would be great. My G.Skill F4-3200C14Q-32GVK is so close to working at spec that it isn't even funny with XMP. All I have to do is drop it from 3200 to 2933 under F5. All settings are correct and I'm not adjusting SOC...yet
Being able to shutdown and restart correctly would be a plus. Whenever I shutdown the PC hangs at a black screen forever and eventually reboots. When this happens my sound card stops working. I'm using PCIEX4 as you recommended before Matt. This isn't limited to a SoundBlaster Z discussed before. I now have a Powercolor HDX that is doing the same thing, but it sounds better and always detects after I power down the system by the button, unplug, wait a few minutes, and then power it back on. The SoundBlaster Z was hit and miss and a real p.i.a. Sorry, I didn't mean to ramble on about that.
See Above... Sort out whatever is haunting the PCI-E devices from detecting and working correctly. Maybe that's the IOMMU. Ability to Enable/Disable one or both on the On Board NICs
Advanced Memory Settings: I've always been able to tinker with more than just 5 settings. Not that I would, but I know some do. Command Rate especially. I know setting that at 2T instead of 1T would be a fix for people who use ram in all of the slots. I'm pretty sure I had to do that on my G1Assassin and UD5 x79 boards.
My Signature... Mainboard: Gigabyte GA-AX370-Gaming 5 Bios: F6D Mainboard: Asus Crosshair VI Hero Bios: 9945 Processor: AMD Ryzen 1700x Video Card: Sapphire Nitro Radeon R9 Fury X2 Sound Card: Sound Blaster Z / PowerColor DEVIL HDX 7.1 Ram: GSkill 32gb(4x8GB) 3200 Kit Gaming 5 2667 CH6 3200 PSU: Coolermaster 1300w
Right now I'm Offline I have made 5 posts
I joined April 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I would love an option to save and apply fan profiles between BIOS updates. It gets a little tedious to reset all my custom fan curves each time I try a new BIOS since the saved profiles don't work between different versions.
Also, on the BIOS Q-flash screen, it would be helpful if it was able to display which bios chip (main/backup) it was flashing to. Had a minor panic when I flashed F5 to the main, it bricked, then automatically recovered to the backup and I mistakenly flashed it to F5 as well only to see it brick as well.
My Signature... X370 Gaming 5 Ryzen 1800x CORSAIR Vengeance LPX CMK16GX4M2B3200C16 GTX 1080 Ti
Right now I'm Offline I have made 7 posts
I joined April 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I currently have the GA-AX370 Gaming 5. Hopefully F6 will allow me to run my CORSAIR Vengeance LED (CMU16GX4M2C3200C16R) RAM at 3200. If I enable XMP the system won't boot, If i manually overclock it will only go to 2933 which is what I am running now. Fingers crossed.
Short term we are working on memory compatibility. Long term is:
Optimizations and newer AGESA code integration from AMD.
P state overclocking?!
Resolving / splitting up IOMMU groups.
What else do you guys wanna see?
The soft-brick after sleep or several hours shut down (you need to remove the battery to get the motherboard to even energize properly) is a problem for several people on this forum. Given the gravity of it, I think you guys should prioritize it. It's strange not to see it being at least acknowledged, considering the amount of people complaining about it (just look at the K7 thread, for instance.)
I'm available to help you guys reproduce the issue if necessary.
Short term we are working on memory compatibility. Long term is:
Optimizations and newer AGESA code integration from AMD.
P state overclocking?!
Resolving / splitting up IOMMU groups.
What else do you guys wanna see?
The soft-brick after sleep or several hours shut down (you need to remove the battery to get the motherboard to even energize properly) is a problem for several people on this forum. Given the gravity of it, I think you guys should prioritize it. It's strange not to see it being at least acknowledged, considering the amount of people complaining about it (just look at the K7 thread, for instance.)
I'm available to help you guys reproduce the issue if necessary.
To be clear: the workaround is removing the battery, waiting 30 seconds, and putting it back in. I saw one user recommending removing and putting back the RAM too.
I currently have the GA-AX370 Gaming 5. Hopefully F6 will allow me to run my CORSAIR Vengeance LED (CMU16GX4M2C3200C16R) RAM at 3200. If I enable XMP the system won't boot, If i manually overclock it will only go to 2933 which is what I am running now. Fingers crossed.
I have 2 8Gb sticks of similar and they work as dual @ 3200, well atleast it reports XMP is active, 3200Mhz and Dual Channel in windows, the speed is 3204.8Mhz according to the EasyTune AdvancedOC section. i set it at 1.35v cause that's the rated volts, but it's usually lower then that
My issues with the same board are USB not always turning on with each boot/reboot Clock speed not showing correctly in stress test/Cpuz like tools etc. the Gigabyte Apps Bios/Tweak tools don't work at all. tho manually tuning through the AdvancedOC section works until you reboot then the bios setting kick in again
The bios is too basic period
Edited May 5, 2017 20:22:36 GMT -8 by gameoveraust
Short term we are working on memory compatibility. Long term is:
Optimizations and newer AGESA code integration from AMD.
P state overclocking?!
Resolving / splitting up IOMMU groups.
What else do you guys wanna see?
Hi Matt, that's great news!
I feel that despite having the "K" in K5 and the BCLK overclocking, it is being left behind by the Gaming 5 in terms of updates.
As for features we'd like to see: · Fixed voltage settings besides offset mode. · Load Line Calibration. · More overclocking stuff! · Enabling or disabling disk drives from BIOS. · Cosmetics, like better layout, nicer graphics, dropdown options for values, etc.
Not asking you to bring it up to par with the C6 Hero, but there is much more room for improvement.
Can you please confirm whether any of these changes are coming to the K5 too?
As for features we'd like to see: · Fixed voltage settings besides offset mode.
Which voltage?
· Load Line Calibration.
This should be under advanced voltage settings, no?
· More overclocking stuff!
Yes, specicially memory timings and adjustments. Should have a new F6 BETA BIOS soon.
Enabling or disabling disk drives from BIOS.
I can add it to the wish list. Currently disable LAN/Audio is also on the list. Disable Audio should be in F6
Cosmetics, like better layout, nicer graphics, dropdown options for values, etc.
Honest answer: Probably not (at least for the foreseeable future). Right now the focus is 100% on functionality. IE: #1 Memory compatibility & Bugs #2 Features like P-State overclocking, IOMMU, etc #3 Features like disable LAN, Audio, etc
That being said if you got ideas I am going to our HQ at the end of the month to meet with our R&D, BIOS & PM teams. Shoot me a solid idea and I'll pitch it!
greggg wrote: Mar 3, 2021 11:03:15 GMT -8 I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?
squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8 You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi
reddorki wrote: Mar 1, 2021 4:06:13 GMT -8 ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory.*
ironlump wrote: Feb 28, 2021 3:37:41 GMT -8 So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment???
jeerus wrote: Feb 27, 2021 14:44:40 GMT -8 Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage
ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8 I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!
yair wrote: Feb 27, 2021 5:12:44 GMT -8 I have a problem booting from usb disdonkey
jozef wrote: Feb 22, 2021 2:03:14 GMT -8 i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME
mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8 Hello!
I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.
The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The
andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8 Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.
andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8 Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :
overxpg wrote: Feb 16, 2021 20:07:34 GMT -8 Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a
eldio wrote: Feb 16, 2021 5:00:09 GMT -8 Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios
grandi wrote: Feb 15, 2021 3:38:57 GMT -8 Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!
amelin00 wrote: Feb 12, 2021 13:20:45 GMT -8 so i have heard that with the new pcie 4.0 gpu´s this will not be a problem?
amelin00 wrote: Feb 12, 2021 13:20:22 GMT -8 I know that you can use the first m.2 slot and still get x16 on the gpu but if i want to use the second m.2 aswell then the gpu will run at x8
??
