Feb 9, 2020 10:56:10 GMT -8

Reply Quote | Like

	juveplu Newbie	Right now I'm Offline I have made 2 posts I joined February 2020		I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Hi, I'm trying without any success to install Windows 7 from DVD to SSD M.2. I have a Motherboard - B365M.

Here's the problem: I don't like Windows 10 like most people I know and try with Win 7

When I install Windows 7 the mouse cursor does not appear. For this they advise the option in BIOS/Power/ERP to be set to - Enabled and there is already a mouse and Win 7 can be installed but only on HD drive but not on SSD M.2 because BIOS does not see it.

But in order for the SSD M.2 to be recognized and installed on it, I read that the option - BIOS/Boot/CSM - should be set to Enabled. OK so the motherboard recognizes DVD and SSD M.2, but now the mouse doesn't work even though - BIOS/Power/ERP is - Enabled. It becomes a vicious circle. Either there is a mouse and HD drive installation, or if the BIOS sees an SSD M.2 the mouse will not work and the installation cannot continue. Is there a solution to this? Please help . I will be very grateful

Feb 9, 2020 11:16:04 GMT -8

Reply Quote | Like

	juveplu Newbie	Right now I'm Offline I have made 2 posts I joined February 2020		I currently have no messenger contact information filled out.	I currently have no social network information filled out.

I forgot to add that I wanted to install from a DVD drive rather than a USB device. As far as I understand, this is another problem. I see that every time I write with a Rufus USB flash drive, the firewall blocks the connection to another IP and the antivirus is activated. Something happens at a low level and antivirus protection can't show anything, but it starts from some low-level process, maybe in the Master Boot Record. And from there in the BIOS chip and. . . . . . If Rufus is pure software then it downloads and adds something to every USB recording. More and more people are turning to DVD. Gigabyte also needs to resume production of DVD laptops.

skizzdog wrote: Jan 24, 2021 16:54:39 GMT -8
Hello I just built a pc using the Gig Z390 M Gaming board.I cannot figure out what drivers to load first.Idont have the CD that came with the board.Can i buy one some place.

arvindh wrote: Jan 22, 2021 18:49:37 GMT -8
Hi,im having 3HD(win10 & Mint) on Aorus B450.now want to install 4th HD with debian10.Is my current setup legacy/UEFI? what care should i take before installing 3rd OS on 4th HD.forum.gigabyte.us/thread/11477/b450-multiboot-legacy-uefi *

razor9103 wrote: Jan 22, 2021 12:00:23 GMT -8
New Z490 Vision D won't boot ... stuck at RED CPU error LED

lima567 wrote: Jan 20, 2021 15:13:51 GMT -8
intender thank you, will try doing that.

masc2279 wrote: Jan 20, 2021 10:45:24 GMT -8
polarox - need more info what board what block version ... I can tell you that I have the EKWB EK-Quantum Momentum TRX40 Aorus Master Monoblock and that block is worth every penny i went thru 3 different solutions and this one is insanely good.

polarox wrote: Jan 20, 2021 8:03:32 GMT -8
hi guys,

does anyone have the bitspower or EK monoblock for this motherboard? Is it worth the money?

intender wrote: Jan 19, 2021 11:55:39 GMT -8
lima567 this is a windows 10 20h2 issue. I had the same thing on one of my computers. I was never able to get logged back into my account on that PC. I moved that drive to another computer and copied over all data I wanted to keep and did a clean install.

joeym wrote: Jan 19, 2021 8:52:33 GMT -8
Is Asus working on a solution for the Intel 300 series?

lima567 wrote: Jan 18, 2021 20:02:50 GMT -8
Have issue “Something happened and your PIN isn’t available. Click to set up your PIN again.” (I disabled start up applications. Trying to get to save mode, when press F12, chose Windows boot, hit enter - gets me back to sign in page. Please help

sozehh wrote: Jan 18, 2021 13:42:41 GMT -8
soooo NOW ASUS is working on resizable bar too....GIGABYTE?

sozehh wrote: Jan 18, 2021 13:42:21 GMT -8
www.reddit.com/r/nvidia/comments/l045ct/asus_released_new_beta_bios_firmware_based_on/

onyx wrote: Jan 16, 2021 20:27:21 GMT -8
. *

sozehh wrote: Jan 16, 2021 10:58:58 GMT -8
joeym ofc i've done it, signed and trying to spread the petition, gigabyte do your work please and add resizable bar for intel 300 series, it is not an old product, people like me spent 800 euros on aorus xtreme, don't tell me i have already an outdated mb

joeym wrote: Jan 16, 2021 7:15:27 GMT -8
I would strongly recommend that anyone who hasn't already signed the petition do so now. If you already signed it, please share it! This may help encourage all other motherboard manufacturers to follow suite. Link to the petition: chng.it/LKLksG4yQv

iuliug wrote: Jan 15, 2021 16:31:07 GMT -8
Yes ADD BAR support for all boards that support it - but GB will ignore this

sozehh wrote: Jan 15, 2021 10:03:18 GMT -8
vigo www.nvidia.com/en-us/geforce/news/geforce-rtx-30-series-resizable-bar-support/

vigo wrote: Jan 15, 2021 9:35:47 GMT -8
what is resizable BAR ?

desaccorde wrote: Jan 15, 2021 0:50:15 GMT -8
300 Series MUST be supported, no other way. MSI supports it. They may think they're pushing their customers for a premature upgrade, but guess what? Even if I upgrade, I wouldn't buy a Gigabyte board. Me and all my close friends will never buy Gig again.

johnyb0y wrote: Jan 14, 2021 4:58:11 GMT -8
@gigabyte, I've personally built with half a dozen of your boards and recommended you at least 5 times last year. This will stop if you screw Z390 users with not supporting Re-BAR. *

mezzer wrote: Jan 14, 2021 2:23:19 GMT -8
This will be my last gigabyte mobo if there's no resize bar support on 300 series.