Help - I am doing a new build with the following component:
Antec Three Hundred Two Mid ATX Tower
Be Quiet - Pure power 11 700 W Power Supply
Gigabyte Z390 Aorus Pro Wif-Fi Ver. 1.0 motherboard
Intel 9th Gen i7-9700K 3.6 GHZ CPU
32 MB (4 sticks) DDR4 2x8GB/16GB 3000 MHz Vengeance LPX RAM
Samsung V-Nand 860 EVO 500 GB SSD
Gigabyte GEForce GT 1020 2 MB video
I put it all together and turned the power supply on at which time the motherboard flashes. When I turn the computer on...nothing happens...no flashes, no beeps (no speaker!) no fans start up, none of the LEDs in the bottom corner of the board are lit. So I tried to jump/short the power switch on the main board to see if the power on the case was bad but that didnt start it up either. I have checked the RAM in another older computer and it works fine in it and with the RAM from the older computer (GSkill RipJaws DDR4-3200) on the AORUS motherboard it still wouldn't start up.
Any suggestions or experience with this happening?