I am having this issue with my new Auros 299X Master, as far it goes on start up is A1 code, stand for A1 Issue reset during IDE initialization process. I check Memories, GPU, CPU 10900X and had no luck with it. Does anyone have any idea or do I have to RMA. Thank for any respond to this issue.
I am having this issue with my new Auros 299X Master, as far it goes on start up is A1 code, stand for A1 Issue reset during IDE initialization process. I check Memories, GPU, CPU 10900X and had no luck with it. Does anyone have any idea or do I have to RMA. Thank for any respond to this issue.
Right now I'm Offline I have made 1,471 posts
I joined January 2017
I've received 191 likes
My gender is Other / Decline to State
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
You can also try our discord if you need help. Link at the bottom of my signature.
Does the system boot into your OS. If so this is a status code not an error code. It generally just means that its booting from the main bios and there is nothing to worry about. you might also see AA or A0. also normal. various other codes will show if waking from sleep and other things. all normal. its only a problem if the system will not boot.
My Signature... I do not work for gigabyte. My advice and opinions are my own.
Right now I'm Offline I have made 7 posts
I joined January 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
No it wont post at all. Nothing on screen, Just see the code is A1. just wondering if it have anything to do with new processor 10900X. Am about to RMA it, Any other idea?
No it wont post at all. Nothing on screen, Just see the code is A1. just wondering if it have anything to do with new processor 10900X. Am about to RMA it, Any other idea?
Right now I'm Offline I have made 7 posts
I joined January 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I notice lots of viewers not much help, This is my first time buying Gigabyte, been loyal to EVGA, Forum and Customer Service is much better, no punt intended. This build is for my son. I have gotten no where with it. I ask for RMA ticket two days ago and no respond from Gigabyte service dept. Is it always like this?
Right now I'm Offline I have made 1,471 posts
I joined January 2017
I've received 191 likes
My gender is Other / Decline to State
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
You can also try our discord if you need help. Link at the bottom of my signature.
fortunately that board has qflash+ which allows you to update the bios without needing a supported cpu. The instructions for using qflash+ are on page 95 in the manual, and I will attach a picture below for quick reference. You need to download bios F3g to support the 10900x, otherwise it will not POST. Bios can be downloaded here.
esupport tickets quite often take 7-10 days to get a response. the will respond eventually.
click the thumbnail for full size.
My Signature... I do not work for gigabyte. My advice and opinions are my own.
Right now I'm Offline I have made 7 posts
I joined January 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Did as per comment and no luck wouldn't post at all. Try several time flashing the bios as per info on manual, still didn't work. I guest is RMA, just got the RMA# from GIGABYTE, will be shipping today. Although I do appreciate you guys help on this issue. I have never encounter issue like this with new item, been building PC for 20 years. Is always the first time. Thanks again guys.
Right now I'm Offline I have made 1 post
I joined May 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I am also having this issue. I'm unable to give a BIOS version as the system never starts the bios and no graphics signal is ever sent to the monitor. Motherboard revision is 1.0 (model: X299 WU8). All methods of bios updating require atleast having access to the BIOSs which most here do not have due to this issue which causes the system to hang before the BIOS starts up. I also have an i9 10900X. My system also seems to restart after being turning off for some reason (both front panel and the motherboard power button, the restart buttons act instantly so I'm definitely not confusing them).
Edited May 15, 2020 20:23:28 GMT -8 by edin116: Added CPU info, it looks like a pattern.
Right now I'm Offline I have made 2 posts
I joined August 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I have also been seeing this issue but it is intermittent. 1 in 8 boots (turning the computer on from it having been powered off) will result in the A0 or A1 code and it does not progress further in the boot cycle.
Normally if I turn it off and turn it back on again I get past the A0 and A1 codes and into my OS.
greggg wrote: Mar 3, 2021 11:03:15 GMT -8 I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?
squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8 You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi
reddorki wrote: Mar 1, 2021 4:06:13 GMT -8 ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory.*
ironlump wrote: Feb 28, 2021 3:37:41 GMT -8 So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment???
jeerus wrote: Feb 27, 2021 14:44:40 GMT -8 Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage
ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8 I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!
yair wrote: Feb 27, 2021 5:12:44 GMT -8 I have a problem booting from usb disdonkey
jozef wrote: Feb 22, 2021 2:03:14 GMT -8 i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME
mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8 Hello!
I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.
The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The
andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8 Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.
andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8 Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :
overxpg wrote: Feb 16, 2021 20:07:34 GMT -8 Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a
eldio wrote: Feb 16, 2021 5:00:09 GMT -8 Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios
grandi wrote: Feb 15, 2021 3:38:57 GMT -8 Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!
amelin00 wrote: Feb 12, 2021 13:20:45 GMT -8 so i have heard that with the new pcie 4.0 gpu´s this will not be a problem?
??
