Right now I'm Offline I have made 24 posts
I joined August 2019
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
if you have 2x16gb sticks, please check the dimm voltage - especially when using xmp!
i have a 2x16gb g.skill trident z kit, and i had to set dimm voltage at 1,33v-1,34v* manually; after that the system is rock stable!
*with 1,35v (as specified within xmp) the system is also stable, but my [email protected] kit gets quite hot. (monitoring dimm voltage in tools like hwinfo shows dimm voltages around 1,404v to 1,416v under load!)
Had to go back to F11 - F12e kept on crashing on me when using XMP1 - did not bother doing things manually - as soon as I downgraded to F11 everything works well.
Things that worked for me : disable xmp use a RAM frequency below your rated spec for example 3133mhz for 3200mhz and then u just use the timings for 3200mhz and lower them till u get the bootloop and make sure u manually set the TRC (the MB will bump it up to ridiculous values by itself) for 3200mhz trc between 55 and 56 works fine...
Right now I'm Offline I have made 10 posts
I joined July 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Very similar setup.
Aorus X570 Elite Bios version: f20 memory: 64gb of Corsair Vengeance Pro RGB 4x16 CMW64GX4M4C3200C16 DDR43200
I've tried everything I have read, but memory will only default to 2133. Anything I do in the bios for memory results in 3 beeps and a long awkward post.
These scenarios don't work:
Setting XMP to Profile 1
Setting DRAM voltage to 1.35
Setting memory clock to 32 or 31.33
Any of the above combinations
following suggestions from TheGiant to disable XMP and set ram freq to 31.33, just stock timings of 16-18-18-36, set tRC to 54
The only thing that seems to work is setting everything to optimized. Once in Windows, seems very stabile. I did check the MSL, and saw that my exact memory wasn't in the list and assumed (I know) that since the publish date of the list was 2020/03/02, that it was just outdated. Seriously, Corsair Vengeance Pro RGB is as common as can be.
FYI, I also uninstalled RGB Fusion.
I tried the DRAM Calc for Ryzen and something interesting happened. I followed the "safe" settings in the bios, still with XMP disabled, and then ran the CPU-Z test and all of the timings are what I specified, but the DRAM Freq is still at 1064.5 instead of 1600 (for DDR4 3200). But if change either DRAM multiplier, bad boot.
Help please.
My Signature... AMD Ryzen 9 3900X Gigabyte Aorus Liquid Cooler 360 Gigabyte X570 Aorus Elite Gigabyte Aorus Radeon RX 5700 XT 8GB Corsair Vengeance RGB Pro 64GB Corsair MP600 Force Series Gen4 1TB M.2 NVME Western Digital Blue 1TB M.2 NVME Lian Li PC-O11 Dynamic case Corsair iCUE QL120 RGB X 9 Corsair Commander Pro Fan Controller Corsair RM650 Power Supply MSI Optix MAG341CQ 34" monitor
Right now I'm Offline I have made 1,253 posts
I joined January 2020
I've received 115 likes
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
bill3900x, I checked your ram against the QVL and it is not listed for your motherboard/CPU combination. Not saying that the ram can't work, because it does. But may not work for XMP. Ryzen seems to be more sensitive with Corsair ram than with some other manufacturers' ram. G.Skill often works better.
Right now I'm Offline I have made 10 posts
I joined July 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Yeah, I just hoped the Gigabyte list was out of date. I just pulled the trigger on a set of G.Skill sticks, F4-3600C16Q-64GTZNC. Yes, I know, it's not on Gigabyte's QVL, but forums are full of success stories with it. Claims to be specially made for X570 Ryzen 3000 setups. G.Skill lists my motherboard on it's list.
I was really hoping to stick with my Gigabyte/Corsair combo build, but you gotta do what you gotta do. Right?
My Signature... AMD Ryzen 9 3900X Gigabyte Aorus Liquid Cooler 360 Gigabyte X570 Aorus Elite Gigabyte Aorus Radeon RX 5700 XT 8GB Corsair Vengeance RGB Pro 64GB Corsair MP600 Force Series Gen4 1TB M.2 NVME Western Digital Blue 1TB M.2 NVME Lian Li PC-O11 Dynamic case Corsair iCUE QL120 RGB X 9 Corsair Commander Pro Fan Controller Corsair RM650 Power Supply MSI Optix MAG341CQ 34" monitor
Right now I'm Offline I have made 1,253 posts
I joined January 2020
I've received 115 likes
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I agree 100%. Had another member update today who, after months of trying to get the Corsair to work, went with G.Skill and immediately got to XMP no problem. Happy camper.
Right now I'm Offline I have made 10 posts
I joined July 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
The G.Skill F4-3600C16Q-64GTZNC worked perfectly right out of the box. Installed it, powered on, opened bios, set XMP and optimal settings, and Windows booted fast and easy. 1796.4MHz in CPU-Z. I'll play around with the Ryzen DRAM Calculator and see what I can do with it, but we're off to a good start. It's a shame the Corsair memory didn't work out. Fortunately I got it on Amazon and the return was super easy.
My Signature... AMD Ryzen 9 3900X Gigabyte Aorus Liquid Cooler 360 Gigabyte X570 Aorus Elite Gigabyte Aorus Radeon RX 5700 XT 8GB Corsair Vengeance RGB Pro 64GB Corsair MP600 Force Series Gen4 1TB M.2 NVME Western Digital Blue 1TB M.2 NVME Lian Li PC-O11 Dynamic case Corsair iCUE QL120 RGB X 9 Corsair Commander Pro Fan Controller Corsair RM650 Power Supply MSI Optix MAG341CQ 34" monitor
greggg wrote: Mar 3, 2021 11:03:15 GMT -8 I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?
squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8 You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi
reddorki wrote: Mar 1, 2021 4:06:13 GMT -8 ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory.*
ironlump wrote: Feb 28, 2021 3:37:41 GMT -8 So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment???
jeerus wrote: Feb 27, 2021 14:44:40 GMT -8 Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage
ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8 I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!
yair wrote: Feb 27, 2021 5:12:44 GMT -8 I have a problem booting from usb disdonkey
jozef wrote: Feb 22, 2021 2:03:14 GMT -8 i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME
mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8 Hello!
I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.
The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The
andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8 Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.
andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8 Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :
overxpg wrote: Feb 16, 2021 20:07:34 GMT -8 Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a
eldio wrote: Feb 16, 2021 5:00:09 GMT -8 Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios
grandi wrote: Feb 15, 2021 3:38:57 GMT -8 Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!
amelin00 wrote: Feb 12, 2021 13:20:45 GMT -8 so i have heard that with the new pcie 4.0 gpu´s this will not be a problem?
??
