davicom wrote: Jul 18, 2021 0:01:30 GMT -8 I tried everything on bios, bifurcation on 8,4,4 and 8,8 with my rtx 3080 ti but without success; force pcie gen4; ahci; nothing seems to solve: is stationary on [email protected] Processor is Intel Core i5 11500K. I would really appreciate some suggestion. Thanks
davicom wrote: Jul 17, 2021 23:58:01 GMT -8 Hi all, I'm really exhaust to try get Samsung NVME 980 Pro run at gen 4.0 on my Z590 Aorus Ultra, it matches just 3.0
kshipper wrote: Jul 16, 2021 10:53:12 GMT -8 amsss: I suggest you pick a category on the left and make a post. This area is limited to 256 characters.
amsss wrote: Jul 16, 2021 9:24:15 GMT -8 hello. is anyone there? i really need help
marson wrote: Jul 14, 2021 9:28:20 GMT -8 Did you read the thread I linked you to? That goes much deeper. Can't go very deep in the 256 characters we're limited to here. Try starting a new thread and asking a more specific question that reflects what still isn't clear.
magrw1033 wrote: Jul 13, 2021 14:12:29 GMT -8 Thx. But that just restates the words of the manual. I was looking for something deeper.
segedite wrote: Jul 9, 2021 12:57:07 GMT -8 I have these two messages: BIOS Mode. Legacy - Secure Boot: Registry not found ... how do I enable the BIOS? on AORUS Z390 PRO ... BIOS Is F12. *
magrw1033 wrote: Jul 9, 2021 10:53:33 GMT -8 What does the cpu and memory status led's really mean?
greggg wrote: Jul 6, 2021 13:00:20 GMT -8 Just stuck a new bios chip (easy job) into my X470 so now I have the very latest bios chip needed (for a Ryzen 5 5600x). Didn't want to try this 'bios update' business because there are too many unhappy stories out there.
gritsmelike wrote: Jul 6, 2021 10:13:23 GMT -8 Thank you, bigdave systems info indicates an un-allow DMA bus device detected have fresh install W10 OEM 21H1 Z490 UD Me built. I didnt have a frt. header E-type for the USB C added card to pcie 3.0x4 slot to convert. sys installed the driver. HUM