Mar 17, 2017 9:37:04 GMT -8 | skarface and evanr11 like this

Reply Quote | Like

	GIGABYTE - Matt	Right now I'm Offline I have made 710 posts I joined July 2016 I've received 231 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter
No Longer works for Gigabyte

Want to spice up your board with a custom 3D printed overlay for your board?

Now you can! Download the DWG file here.

Be sure to post a picture after you're done!!!

Edited Mar 17, 2017 9:40:14 GMT -8 by GIGABYTE - Matt

May 14, 2017 21:07:02 GMT -8

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

I will be making another piece of acrylic soon when i do i will post a pic! Im very surprized i haven't seen anyone do it yet.

I was kinda thinking maybe gigabyte would sell some pre-made, like different packs and stuff!

May 16, 2017 10:15:18 GMT -8

Reply Quote | Like

	triffid	Right now I'm Offline I have made 55 posts I joined April 2017 I've received 1 like	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

It is a nice idea. However Gigabyte does not intend to sell any packs of pre-designed overlays. Either you have only the one on your motherboard or one on your MB and one extra (Gaming 9). That is all. You can get another from Gigabyte for free on conventions or trade fairs, or win one on Facebook etc. They will even print your name or anything you want on it.

My Signature...

FOR THE LIST OF ULTRA HD BLU-RAY COMPATIBLE MOTHERBOARDS CLICK HERE

My hardware: Aorus Z270X Gaming 8 motherboard + i7 7700 CPU + Pioneer BDR-S11J-BK drive

Edited May 16, 2017 10:16:00 GMT -8 by triffid

May 16, 2017 21:48:05 GMT -8

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

May 16, 2017 14:15:18 GMT -4 triffid said:
It is a nice idea. However Gigabyte does not intend to sell any packs of pre-designed overlays. Either you have only the one on your motherboard or one on your MB and one extra (Gaming 9). That is all. You can get another from Gigabyte for free on conventions or trade fairs, or win one on Facebook etc. They will even print your name or anything you want on it.

Ohh cool i will check into that i did not know that thanks for the info!

Edited May 16, 2017 21:51:42 GMT -8 by skarface

May 17, 2017 12:05:32 GMT -8

Reply Quote | Like

	triffid	Right now I'm Offline I have made 55 posts I joined April 2017 I've received 1 like	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Here is one of the promotional overlays:

instagram.fprg1-1.fna.fbcdn.net/t51.2885-15/s640x640/sh0.08/e35/16230724_1829793763955948_6737994880657653760_n.jpg

The overlay on Z270 Phoenix Gaming is also nice:

cz.gigabyte.com/FileUpload/Global/KeyFeature/633/images/slider-4.jpg

My Signature...

FOR THE LIST OF ULTRA HD BLU-RAY COMPATIBLE MOTHERBOARDS CLICK HERE

My hardware: Aorus Z270X Gaming 8 motherboard + i7 7700 CPU + Pioneer BDR-S11J-BK drive

May 17, 2017 13:41:54 GMT -8

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

May 17, 2017 12:05:32 GMT -8 triffid said:

Those look awesome i did a search and spent about an hour trying to find some modded ones to buy but no luck! thanks for the info!

I guess ill just have to make my own but right now i really dont feel like opening the case etc to see what im dealing with. I really wished the 8s came with an extra one as the 9s did.

Edited May 17, 2017 13:43:04 GMT -8 by skarface

May 18, 2017 22:51:19 GMT -8

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Well gents i have a ball rolling on these accent overlays as i type!!! Pics will be up soon and maybe production on these to sell with whatever u want as long as the 3d printer can handle it!

So, those of u who have been looking for one to buy like i have, there might be an answer to the solution very soon. One has already been done, now testing laser graphics in overlay and should have a pic up around monday may 22nd!

May 18, 2017 22:57:56 GMT -8 | HopnDude likes this

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

May 18, 2017 22:51:19 GMT -8 skarface said:

take that back pic going up now! Here is test no.1! Now i know its very plain atm but this is the very first one it will get better soon! Hopefully monday a finished one in the pc with lights shining through it!

May 19, 2017 14:12:20 GMT -8 | GIGABYTE - Matt, HopnDude, and 1 more like this

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Here is a pic of it installed with a couple different colors. Monday it should be tweaked graphically now that proper fitment and checking is now complete and good! Im thinking spacing out the letters some and adding bullets or something any idea welcome!

May 19, 2017 14:28:13 GMT -8

Reply Quote | Like

	triffid	Right now I'm Offline I have made 55 posts I joined April 2017 I've received 1 like	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Wonderful!

My Signature...

FOR THE LIST OF ULTRA HD BLU-RAY COMPATIBLE MOTHERBOARDS CLICK HERE

My hardware: Aorus Z270X Gaming 8 motherboard + i7 7700 CPU + Pioneer BDR-S11J-BK drive

Jun 5, 2017 19:37:19 GMT -8

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Sorry, i have not updated this thread with the end result yet, ive been very busy but i should be able to show the finalized overlay wed june 7th. I also wanted to note the dimension download on this thread is a little off compared to the actual overlay from gigabyte. Its not a big deal it should still work (have not tested it) i just noticed it was off. Since the measurements were a little off I ended up doing the dimensions directly off the oem overlay and it woks fine ive had the prototype installed now for weeks without issue.

Jun 7, 2017 17:04:13 GMT -8

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Here is an update. It was very hard to get a good pic with the focus and glare from the leds. The pics really dont do it justices, it looks much better in person. I took a few pics with and without flash. With the flash off u can see the details better. Its 3 9mm bullets with three shots through the glass appearance.

Here is a few pics from outside my case!

Jun 7, 2017 23:47:18 GMT -8

Reply Quote | Like

	kapna	Right now I'm Offline I have made 1 post I joined June 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Awesome work Skarface!
How did you create it?
Do you need a 3d printer for a plain overlay and then a laser to "cut" the picture on it?

Jun 8, 2017 9:57:04 GMT -8

Reply Quote | Like

	skarface	Right now I'm Offline I have made 116 posts I joined January 2017 I've received 8 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Pretty close minus the 3d printer that wood take way to long to pump these out. Basically a cnc machine to cut the overlay then a laser machine to etch the surface!

Jun 27, 2017 6:17:20 GMT -8

Reply Quote | Like

	HopnDude	Right now I'm Offline I have made 171 posts I joined March 2017 I've received 12 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.
That's nuckin futz!

Thanks again skarface it turned out great!

imgur.com/a/GDWYf

My Signature...

intender wrote: Aug 5, 2020 14:49:52 GMT -8
Global giveaway for people who join and contribute enough points to the Team Gigabyte [email protected] team. Chances to win monitors and steam gift cards.

intender wrote: Aug 5, 2020 14:48:55 GMT -8
forum.gigabyte.us/thread/10043/aorus-folding-home-giveaway-global

hardcoregames wrote: Aug 5, 2020 13:03:56 GMT -8
upgrade to windows 10

redneckinfidel wrote: Jul 30, 2020 11:57:47 GMT -8
Does anyone know how to get driver support for Win 8.1, specifically for the onboard Wireless AC9560/Bluetooth module?

laercioperoza wrote: Jul 29, 2020 18:39:21 GMT -8
Hi guys! Anyone who knows about ARGB headers on Gigabyte mobo? please help me

forum.gigabyte.us/thread/9991/z370-aorus-gaming-argb-headers

kshipper wrote: Jul 29, 2020 14:38:32 GMT -8
PCiProb: Since that PSU is modular I think your best best is a local computer shop that has a broken modular PSU that they can rob one from. They really look like the same cable as Corsair uses if that helps you

pcieproblems wrote: Jul 29, 2020 11:24:34 GMT -8
However, Im unable to find a replacement cable after about 2 weeks of searching. I cant find a PCIe power cable thats compatible with my G750h PSU. Has anyone had/heard/ or seen this problem before?

pcieproblems wrote: Jul 29, 2020 11:22:07 GMT -8
Hola friends. I have a bit of an issue with compatibility. I have a Gigabye G750h PSU, and a Zotac gaming 2080 RTX super. I recently shipped it across the nation and while doing so managed to damage my PCIe cable 8pin male to duel male (6+2). *

dmaistro wrote: Jul 29, 2020 8:20:45 GMT -8
I am looking at a W480 Vision D motherboard and have a couple of questions on the M.2 memory.

Can you boot from the M2A_CPU memory?
Is the M2M_SB for Optane memory support?
What is M2P_SB for?

jhon wrote: Jul 28, 2020 19:53:19 GMT -8
Does the F10b version work correctly for z390 Aorus Ultra?

jhon wrote: Jul 28, 2020 19:31:54 GMT -8
Hi all, I have a z390 Aorus Ultra, Why when I connect the power supply to the cpu, the 12-pin does not start, but when I only connect to the 4-pin, does everything work normally? Help me please *

laercioperoza wrote: Jul 28, 2020 18:41:32 GMT -8
Hi guys! Anyone who knows about ARGB headers on Gigabyte mobo? please help me

forum.gigabyte.us/thread/9991/z370-aorus-gaming-argb-headers

kshipper wrote: Jul 28, 2020 18:05:44 GMT -8
frankcasslest: I have zero experience with this..I just leave the RGB on the all colors changing but I would imagine there is some kind of driver you need and some software you need to control it all...I have seen Colonelhop give solid advice on this...

kshipper wrote: Jul 28, 2020 18:04:28 GMT -8
alternety: I suggest you fire up a thread on the left here under AMD Motherboards subheading AM4. Are seeing anything when you fire it up? It gets to POST then can't find the Windows boot flash drive. I'm thinking fastboot off...CSM off for starters

kshipper wrote: Jul 28, 2020 18:02:06 GMT -8
laggy: I have not done much in the world of RGB so I would not be much help....maybe start a thread on the left here under General and ask that same question?

frankcastlest wrote: Jul 28, 2020 11:47:46 GMT -8
Hi all, I need help. Recently I bought a Gigabyte RX 5600 XT Gaming OC video card and i installed the RGB Fusion app from the GB site, so the rgb led on the side turned completely blue and I can't find a way to correct this, GPU works fine! any idea? *

alternety wrote: Jul 28, 2020 5:59:18 GMT -8
I feel stupid asking this - but. I have a new X570 Ultra.I am trying to get things to work. I just can not get the win 10 install to work. I have also been trying for a number of hours to figure out how to update the bios. I just do not understand gigabyte *

laggy wrote: Jul 27, 2020 7:40:53 GMT -8
Hello guys, i'm new in this forum and i need help: i have a motherboard (b450 Aorus pro) thats driving me crazy with the rgb on my case, it "disables" the external rgb mode button of my case (Nfortec Vega) and i cant control the RGB anymore, any tip? TY

kshipper wrote: Jul 27, 2020 0:20:36 GMT -8
garystan: You can't! You will have to backup your data and re-install Windows x64 version

ptran3014 wrote: Jul 26, 2020 13:06:51 GMT -8
I am having BSOD when installing the App Center on X399 Aorus Extreme motherboard. The gdrv2.sys causes the problem. *