I have the same issue, and also have ryzen 2700x with gigabyte ab350n gaming 3. I have seen quite a few sites that say if you set windows power settings to balanced it stops it. However it does not seem to take much activity on the cpu to create the edc maxing out again.
please can anybody help me? I´ve done all the steps in the bios section, update FW, update amd chipset drivers... first update to F31... but if I update to any later bios version, F40, F42, F50.... windows just crash with a blue screen of death. I can always make a downgrade from F42 or F50 to my loved F31 and everywith works fine But.. I wan to sell my 2600 and go for an 3700x, another question.. there´s no support for ryzen 3700? only 3700x? I´m very tired about to make tests, upgrading... downgrading... almost with F31 all is fine
And my ram is alwarys well recogniced and working at 3200 with no issues
Right now I'm Offline I have made 13 posts
I joined June 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Hey guys, been away for a very long time. Can anybody recommend me a (2933) 3000 or 3200Mhz 16x2 or 8x2 RAM kit good for this mobo running a Ryzen 7 1700?
I'm running a
Ryzen 7 1700 on my AB350 Gaming 3 still stuck at BIOS F6
because my Ryzen 1700 is overclocked @ 36.00 on all cores and is only stable at this version.
I'm presently running a pair of G.Skill Trident Z F4-3200C16D-16GTZB 8GBx2 3200Mhz at 2933Mhz.
Can't go any higher on the RAM as the overclock becomes unstable or the board would just boot loop.
To people with the same setup, I would like to know what RAM kits are good now, especially with the more modern kits coming out and have come out recently. I would also like to know if there's a BIOS version update needed to make them work with this setup. I can make do with adding 2 sticks of another kit to my Trident Zs (I can't buy the same stuff here anymore, no stocks), or remove the Trident Zs altogether for a new kit. I'm just looking to upgrade to at least 32GB with at least 2933Mhz or 3200Mhz if possible. Somebody please help.
EDIT:
So I just took the risk and bought an 8x2 kit of the more recent G.Skill Trident Z RGB 3200C16D GTZR RAM to add to my old 8x2 kit for 32GB total. Obviously, the BIOS and the board didn't like the new kit and wouldn't boot without resetting all the BIOS options and down-clocking all my RAM into 1800~Mhz. Had to deal with a load of testings and settings again until I just happened upon some random post online about a different board with Ryzen 1600 where the user was struggling to upgrade from two sticks of RAM to four with a B350 board. Apparently, that user was able to settle with setting his RAM to 3066.
So I updated my BIOS to F31n just because I didn't want to update back up to F51 (have to go to F31n first), popped by previous working 2-stick CPU and RAM overclocks on the values, then set the RAM frequency to 3066 instead of 2933. Voila! It boots and it stays that way. Didn't even mess with timings and just upped the DRAM voltage to the advertised 1.35v both my RAM kits are rated for.
Edited Sept 4, 2020 10:37:49 GMT -8 by kamikaze00007: Solved my issue.
Hey guys, been away for a very long time. Can anybody recommend me a (2933) 3000 or 3200Mhz 16x2 or 8x2 RAM kit good for this mobo running a Ryzen 7 1700?
I'm running a
Ryzen 7 1700 on my AB350 Gaming 3 still stuck at BIOS F6
because my Ryzen 1700 is overclocked @ 36.00 on all cores and is only stable at this version.
I'm presently running a pair of G.Skill Trident Z F4-3200C16D-16GTZB 8GBx2 3200Mhz at 2933Mhz.
Can't go any higher on the RAM as the overclock becomes unstable or the board would just boot loop.
To people with the same setup, I would like to know what RAM kits are good now, especially with the more modern kits coming out and have come out recently. I would also like to know if there's a BIOS version update needed to make them work with this setup. I can make do with adding 2 sticks of another kit to my Trident Zs (I can't buy the same stuff here anymore, no stocks), or remove the Trident Zs altogether for a new kit. I'm just looking to upgrade to at least 32GB with at least 2933Mhz or 3200Mhz if possible. Somebody please help.
EDIT:
So I just took the risk and bought an 8x2 kit of the more recent G.Skill Trident Z RGB 3200C16D GTZR RAM to add to my old 8x2 kit for 32GB total. Obviously, the BIOS and the board didn't like the new kit and wouldn't boot without resetting all the BIOS options and down-clocking all my RAM into 1800~Mhz. Had to deal with a load of testings and settings again until I just happened upon some random post online about a different board with Ryzen 1600 where the user was struggling to upgrade from two sticks of RAM to four with a B350 board. Apparently, that user was able to settle with setting his RAM to 3066.
So I updated my BIOS to F31n just because I didn't want to update back up to F51 (have to go to F31n first), popped by previous working 2-stick CPU and RAM overclocks on the values, then set the RAM frequency to 3066 instead of 2933. Voila! It boots and it stays that way. Didn't even mess with timings and just upped the DRAM voltage to the advertised 1.35v both my RAM kits are rated for.
Probably you won't get 3200Mhz ever, it's not the memory is the 1700, not all can get 3200 in Infinity Fabric speed, my 1700X didn't get more than 2933 or 3000 Mhz stable, I changed it to a 3700X and now I'm getting 3200Mhz without any problem
My Signature... GA - AB350 Gaming 3 (F51b BIOS) Ryzen 7 3700X G.Skill Trident Z 3200Mhz 2x8GB (XMP enabled) CL 14 Sapphire Radeon VII Corsair H115i RGB Platinum NOX Hummer TGX NVME Samsung 970 EVO 1TB (Primary with OS) SSD Samsung EVO 840 500GB SSD SanDisk Ultra II 960GB HDD Hitachi 7200 RPM 2 TB (don't remember model) Windows 10 x64 (Up to date, Game mode disabled)
Right now I'm Offline I have made 1 post
I joined December 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
AB350-3
AMD Ryzen 3 1200 - Quad Core, 3.1Ghz
16G 3200 RAM
Win10-64
F51b bios
default bios setup and with fast boot....
Boot times are horrible! I get 30sec or longer with a "-" on the screen... then goes to bios boot selection " del to enter bios, etc..." for another 30sec to min... USB keyboard has power... but is not recognized. After about another min, USB kicks in and I can enter BIOS settings.
Everything boots and runs fine, games run with no issues. But that boot time is killing me. I recently updated to the F51b due to mentioning of boot time issues on several bios's... no luck. F51b seems to make it worse, adding in the "-" screen...
Boot times are horrible! I get 30sec or longer with a "-" on the screen... then goes to bios boot selection " del to enter bios, etc..." for another 30sec to min... USB keyboard has power... but is not recognized. After about another min, USB kicks in and I can enter BIOS settings.
Everything boots and runs fine, games run with no issues. But that boot time is killing me. I recently updated to the F51b due to mentioning of boot time issues on several bios's... no luck. F51b seems to make it worse, adding in the "-" screen...
Any ideas anyone? Everything is appreciated!!!
Do you have something more than keyboard and mouse connected to PC?
Any news about possible new BIOS f60 with AMD AGESA V2 1.0.8.1 or AGESA COMBO AM4 V2 1.1.0.0 support for this mobo?
I don't think it's coming, I'd really like an update for SAM/resize BAR support. I might try flashing a 450 BIOS once the final versions are released since someone in the beta thread seems to have succeeded in doing that on a B350 board.
greggg wrote: Mar 3, 2021 11:03:15 GMT -8 I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?
squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8 You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi
reddorki wrote: Mar 1, 2021 4:06:13 GMT -8 ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory.*
ironlump wrote: Feb 28, 2021 3:37:41 GMT -8 So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment???
jeerus wrote: Feb 27, 2021 14:44:40 GMT -8 Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage
ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8 I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!
yair wrote: Feb 27, 2021 5:12:44 GMT -8 I have a problem booting from usb disdonkey
jozef wrote: Feb 22, 2021 2:03:14 GMT -8 i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME
mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8 Hello!
I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.
The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The
andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8 Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.
andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8 Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :
overxpg wrote: Feb 16, 2021 20:07:34 GMT -8 Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a
eldio wrote: Feb 16, 2021 5:00:09 GMT -8 Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios
grandi wrote: Feb 15, 2021 3:38:57 GMT -8 Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!
amelin00 wrote: Feb 12, 2021 13:20:45 GMT -8 so i have heard that with the new pcie 4.0 gpu´s this will not be a problem?
??
