Thanks for your suggestions. I can confirm that I have used the BIOS from the gigabyte website, and that I clear CMOS each time.
However I thought maybe I have something corrupt because I noticed that on cold boot the mobo LED would show it was trying to boot from main then backup BIOS both of which ended up being F5I.
So I did a Q FLASH PLUS.. and voila the problem is solved. I must have had some corruption of BIOS not being overwritten despite usual process.
When will the BIOS with the fix for WHEA errors be released to the public? Thanks!
What Whea errors?...heard a lot about them, never seen even one in my Windows event logs...btw, you know they are not "errors," I hope. The people who see them say they are "warnings"--which means they are OS bugs the OS has self-corrected. When you see a warning, it's already been fixed by the OS.
My Signature... Windows10x64 Pro v2004, build 21322.1000 AMD 50th Anniversary 5700XT PCIe4 mode Aorus Master x570 Rev 1.0 Bios F32 Corsair HX-850 PSU (72a x1 12v rail) AMD Ryzen 9 3900X RAM 32GB 4x8GB, Patriot Viper Steel @ 3733MHz @1.35v LG MultiDrive DVD writer Boot: Samsung 980 Pro 500GB PCIe4 Samsung 960 EVO NVMe 250GB 2x 1TB WD Blue 7200 rpm ST2000DM SATA 3 2TB ST4000DM004 S3 4TB Wired Ethernet 105Mb/s BenQ EW-3270U 4k, HDR10 monitor
When will the BIOS with the fix for WHEA errors be released to the public? Thanks!
What Whea errors?...heard a lot about them, never seen even one in my Windows event logs...btw, you know they are not "errors," I hope. The people who see them say they are "warnings"--which means they are OS bugs the OS has self-corrected. When you see a warning, it's already been fixed by the OS.
Some of the WHEA errors that have come up are uncorrectable, resulting in BSOD. Some of the errors result in Windows Event 17 warnings of WHEA errors getting corrected. In either case, both refer to 'WHEA errors', whether uncorrected & causing a crash or corrected & getting a warning of a WHEA error. I don't know if both stem from the same root cause, it may also be caused by Nvidia drivers, but Matt did mention they were looking to fix something related to WHEA errors in an upcoming BIOS so I wanted to ask if that BIOS version was out of Beta yet and available for people who still have an issue regarding WHEA errors.
Right now I'm Offline I have made 6 posts
I joined August 2019
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I found the thread over at Overclock.net and reposting here in case it helps. It looks like there are new beta BIOS out (BIOS F5n for the Aorus Master, also in combo with AGESA 1003abb).
If you are having fan after resume issues or still get whea errors please test this and let me know if its resolved. If it is we can release for all the boards. If the issues persist please let me know the steps to reproduce your problem and I can test on my system*
*Please note this is not a call for general troubleshooting. This is specifically for problems that seem to be affecting multiple users from the front page - IE Fan issues resuming from sleep & whea errors."
He also updated the OP post with new beta BIOS for other X570 boards for people who want to try them out:
Last edited by GBT-MatthewH; 08-14-2019 at 10:24 AM.
Reported Issues Status
IssueStatus Fans go to 100% after sleepShould be fixed in above BIOS 8/12 WHEA errorsShould be fixed in above BIOS 8/12 BIOS Resets after PSU is unplugged or switched offFixed in latest BETA BIOS 8/2 Disabling CSM causes BIOS to become slowReproducible / Working on a fix SOC too low after sleepFixed 7/31 High idle voltage with memory over 3600Fixed 7/31
Right now I'm Offline I have made 431 posts
I joined July 2019
I've received 32 likes
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Terraformers Anonymous
OK, thanks for the update on the new bios. Interesting that I haven't seen any errors or warnings in my logs. Nor do I have any bsod's as of yet, thankfully. But I don't have an RTX nVidia GPU, either. Thanks for the info on 5N--I forget that he posts on OC.net before he posts about new bioses here! Thanks for reminding me....;)
My Signature... Windows10x64 Pro v2004, build 21322.1000 AMD 50th Anniversary 5700XT PCIe4 mode Aorus Master x570 Rev 1.0 Bios F32 Corsair HX-850 PSU (72a x1 12v rail) AMD Ryzen 9 3900X RAM 32GB 4x8GB, Patriot Viper Steel @ 3733MHz @1.35v LG MultiDrive DVD writer Boot: Samsung 980 Pro 500GB PCIe4 Samsung 960 EVO NVMe 250GB 2x 1TB WD Blue 7200 rpm ST2000DM SATA 3 2TB ST4000DM004 S3 4TB Wired Ethernet 105Mb/s BenQ EW-3270U 4k, HDR10 monitor
So i'm on F5N beta bios now but still Win 10 would not go to SLEEP.. tried every combination of ram settings, fresh win 10 1903 install with all the latest chipset and drivers etc
What fixed it however, was disabling "onboard lan port 2" (Realtek) under IO ports in bios... Sleep now works
and with F5N bios, after resume fans will spin to 100% for maybe just a sec then ramps down. So that is fixed now.
So i'm on F5N beta bios now but still Win 10 would not go to SLEEP.. tried every combination of ram settings, fresh win 10 1903 install with all the latest chipset and drivers etc
What fixed it however, was disabling "onboard lan port 2" (Realtek) under IO ports in bios... Sleep now works
and with F5N bios, after resume fans will spin to 100% for maybe just a sec then ramps down. So that is fixed now.
I always disable motherboard devices I don't use as a matter of habit--I think it's a good habit actually, as no point in taking up system resources for devices you either do not have or use. If a device isn't present in the bios but appears in the Win10 Device Manager, I'll disable the device in the Device manager, as well--If I don't use/need it, of course. Glad to see 5N seems to be working, but am a bit puzzled as to why the 5N bios hasn't yet propagated to any of GB's servers as a default bios version--as 5Fl took only a couple of days to appear on the servers, after being posted on the OC.net page as beta. Makes me think they aren't quite ready to release 5N officially beyond the beta stage. 5P, maybe?....;)
Only problem I have yet to see reconciled is the problem the mboard has in recognizing my PCIe4 GPU @ boot! It's sporadic, now. Sometimes it boots into PCIe4 mode (this is only for GPU PCIE4 mode--there is no complaint about other PCIe4 devices), sometimes it will only boot correctly after a wait of 30-secs to several minutes--it varies. Other times it only successfully boots into PCIe4 mode for the GPU after a series of cold boots. Conversely, booting with the GPU set to PCIe3 mode works like clockwork, every time. Looking forward to seeing that resolved eventually--but for now, just booting my PCIe4 GPU in PCie3 mode works fine and as expected, every time. This is a problem that has persisted through every bios I've used, from F3 on up to my present F5l.
My Signature... Windows10x64 Pro v2004, build 21322.1000 AMD 50th Anniversary 5700XT PCIe4 mode Aorus Master x570 Rev 1.0 Bios F32 Corsair HX-850 PSU (72a x1 12v rail) AMD Ryzen 9 3900X RAM 32GB 4x8GB, Patriot Viper Steel @ 3733MHz @1.35v LG MultiDrive DVD writer Boot: Samsung 980 Pro 500GB PCIe4 Samsung 960 EVO NVMe 250GB 2x 1TB WD Blue 7200 rpm ST2000DM SATA 3 2TB ST4000DM004 S3 4TB Wired Ethernet 105Mb/s BenQ EW-3270U 4k, HDR10 monitor
Right now I'm Offline I have made 6 posts
I joined August 2019
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
There's an even newer beta BIOS out today, at the same link I posted above. Beta BIOS version F5o for Aorus Master + other new versions for X570 boards. No change log provided.
Right now I'm Offline I have made 7 posts
I joined August 2019
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Hi guys, using latest F4j BIOS with x570 Pro WiFi, 3900x, 3200Mhz Gskill TridentZ 14-14-14-34 ram and 2x 1080ti cards. First issue I have is that it sometimes initializes my 2nd gpu as primary as if it’s in 1st PCIe slot then randomly after a restart it starts recognizing my top GPU as a primary one. Seems like there is an issue with dual GPU setups on this board. Also, my board stops POSTing and resets settings, sometimes I will do a simple restart without changing any settings and it when it begins the POST process it will get hung on memory led. It then resets the settings, this only seems to happen if i change CPU multiplier and set XMP profile for my memory. Strangely, if I remove one of my GPUs i have way less issues with my board POSTing
EDIT: I am trying the BETA F4M BIOS and it seems to have resolved my GPU issue for now. It appears to be stable for now as well. I had issues with custom timings not being applied to memory in previous versions and will have to give it a try in this beta version. F4M looks promising
greggg wrote: Mar 3, 2021 11:03:15 GMT -8 I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?
squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8 You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi
reddorki wrote: Mar 1, 2021 4:06:13 GMT -8 ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory.*
ironlump wrote: Feb 28, 2021 3:37:41 GMT -8 So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment???
jeerus wrote: Feb 27, 2021 14:44:40 GMT -8 Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage
ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8 I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!
yair wrote: Feb 27, 2021 5:12:44 GMT -8 I have a problem booting from usb disdonkey
jozef wrote: Feb 22, 2021 2:03:14 GMT -8 i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME
mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8 Hello!
I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.
The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The
andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8 Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.
andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8 Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :
overxpg wrote: Feb 16, 2021 20:07:34 GMT -8 Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a
eldio wrote: Feb 16, 2021 5:00:09 GMT -8 Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios
grandi wrote: Feb 15, 2021 3:38:57 GMT -8 Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!
Yes, the bios is immature, no question--it is still struggling in identifying and configuring my PCIe4 GPU at boot. 
??
