it's won't boot 4x16GB sticks from 2 sets of G.Skill F4-3200C14D-32GTZS using XMP profile which was working perfectly fine on F3g (but not F3j)
PWM and voltage fan regulation is there
Sonnet Allegro Pro USB 3.0 works
I had a complete system freeze today, had to hard reboot and I've noticed that 2 of the 8 cores are constantly at 100%, increasing the voltage and temps. I've reverted back to F3j
Right now I'm Offline I have made 12 posts
I joined June 2018
I've received 1 like
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
My findings,
Goods; -The stutter of F3j felt gone -Latest agesa revision for TR1 is now implemented (same as my modded bios) -New microcode for TR1+ -PWM/Voltage modes are back and working (yay).
Bads; -CBS options are half gone -memory controller options, are all over the place and nearly unfindable -First and Last cores seem to already run at max clock, preventing the chip from idling properly, resulting in 10c higher idle temps and high idle power. Changing the Powersupply idle mode did nothing to change that. Nor did any combination of c states/coolnquiet etc
Note the agesa “1.1.0.0” is for next gen cpus (zen1+), its still only “1.0.0.6” for zen1. Ive been learning alot about AMD microcode implementation and CPUID stuff too.
anyone with vfio able to try this? I just updated and now even though I have SVM enabled, it's still telling me kvm is disabled in the bios. Have tried toggling it both off and on
Right now I'm Offline I have made 2 posts
I joined July 2018
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
SVM works for me. Remember to revert to optimized defaults after updating the BIOS
My observations on F10
SVM works
VFIO works just as expected (I do GPU passthrough on X399 AORUS Gaming 7)
Nasty framebuffer issue when using SimpleFB & UEFI which caused a framebuffer failing to initialize (AKA black screen) when Above 4G decoding was enabled in BIOS
PSP init hanged/failed and kernel module initializer got stuck in D-state, this was fixed by setting kernel option CONFIG_CRYPTO_DEV_SP_PSP=n .
SVM works for me. Remember to revert to optimized defaults after updating the BIOS
My observations on F10
SVM works
VFIO works just as expected (I do GPU passthrough on X399 AORUS Gaming 7)
Nasty framebuffer issue when using SimpleFB & UEFI which caused a framebuffer failing to initialize (AKA black screen) when Above 4G decoding was enabled in BIOS
PSP init hanged/failed and kernel module initializer got stuck in D-state, this was fixed by setting kernel option CONFIG_CRYPTO_DEV_SP_PSP=n .
tried restoring default options then enabling iommu and svm, still no luck. are there any other options I need to change?
SVM works for me. Remember to revert to optimized defaults after updating the BIOS
My observations on F10
SVM works
VFIO works just as expected (I do GPU passthrough on X399 AORUS Gaming 7)
Nasty framebuffer issue when using SimpleFB & UEFI which caused a framebuffer failing to initialize (AKA black screen) when Above 4G decoding was enabled in BIOS
PSP init hanged/failed and kernel module initializer got stuck in D-state, this was fixed by setting kernel option CONFIG_CRYPTO_DEV_SP_PSP=n .
are you sure about this? like I said, still not working for me for svm/vfio, may have something to do with agesa 1.1.0.0 code as mentioned here: forum.gigabyte.us/post/21651/thread
greggg wrote: Sept 26, 2020 20:41:50 GMT -8 I have been reading you people and counting my own problems I am thinking that these motherboard manufacturers think home builders are just western dolts. Maybe we should all turn to Gateway or Dell or ASUS store-bought computers for the near future.
My motherboard is aourus x299 gaming 9. My USB 3.1 Gen 2 Type 2 (red) not working is currently not working while the USB 3.1 gen 1 (blue) is working well. The gen 2 is able to provide the power but not showing up any connected devices on my windows.
kshipper wrote: Sept 23, 2020 17:53:14 GMT -8 fredmarjo: I assume you created your bootable USB key of Windows was it? Using the Media Creation Tool? Just Google that if you are not sure what I am talking about. This method has never failed me.
fredmarjo wrote: Sept 23, 2020 17:33:11 GMT -8 Hello, I just finished assembling the PC with a Z490 Vision D motherboard. When I put the bootable key in and press F12, I get a message telling me that the key USB is not detected. do you have an idea? Thanks for your help. Yours sincerely.
leal wrote: Sept 22, 2020 18:45:53 GMT -8 I have a new Gigabyte Z490 UD AC. Is terrible to get Bios setup. In the screen Ultra Durable I press F12 for boot menu, nothing happen. I press Del for boot setup the same thing, screen is freezed. I can not select boot device for windows installation, if
leal wrote: Sept 22, 2020 18:40:35 GMT -8 Hello. A few days that a new Gigabyte desktop computer Z490 UD AC wifi. I can not install windows 10 because is terrible to setup the BIOS that get freeze when computer is turn on. If I press F12 for boot menu or del for boot stup, still freeze the screen.
colonelhop wrote: Sept 22, 2020 9:16:53 GMT -8 Madrow, contact Gigabyte support to ensure compatibility of SSD. Good luck
madrow wrote: Sept 22, 2020 4:38:51 GMT -8 the ssd compatibile to the laptop?
fredmarjo wrote: Sept 21, 2020 6:04:17 GMT -8 If not, the plug format of the other motherboards corresponds to the description on page 28, item 9: D_LED1/D_LD2. Is this where I should connect the plug?
Thank you in advance for your help.
Yours sincerely,
Frédéric
fredmarjo wrote: Sept 21, 2020 6:03:51 GMT -8 For a Gigabyte motherboard, the manual asks to connect the VDG plug to the motherboard. For ASUS, MBI and ASROCK the format of the plug is different. I did not find a VDG connector on the vision D motherboard. Is this an error on my part?
I finish the PC assembly with a Gigabyte Z490 vision D motherboard. I need to connect the power supply color management to the motherboard. For a Gigabyte motherboard, the manual asks to connect the VDG plug to the motherboard. For ASUS, MBI and A
jaredftmfw wrote: Sept 21, 2020 5:12:24 GMT -8 Can someone help me? I have a ga-ab350m gaming 3 motherboard, and I bought a liquid cooler and fans. (darkflash tr240 and dr12 fans) The liquid coolers says that it needs a +5v pin definition as CF11. Can I put those items on my rig? Thanks for answering
leal wrote: Sept 20, 2020 21:56:43 GMT -8 Hello, To whom can help me. I have a new Z490 UD AC where on DRAM Led light is on What this mean? An d the monitor does not get signal. Thanks in advance. Caridad
kshipper wrote: Jul 4, 2020 12:22:58 GMT -8 I had that happen on a old FM2 board. I had to install a network card in a spare PCI slot. If you checked BIOS and it is enabled then from Windows check Device Manager to see if it detected. if it is, you can apply a driver otherwise it's new NiC time
denisjssmg wrote: Jul 4, 2020 11:40:57 GMT -8 It used to work properly before...
denisjssmg wrote: Jul 4, 2020 11:40:35 GMT -8 Hello. Can someone help me? My LAN has suddenly vanished from existence. I've already tried installing the AMD chipset newest driver, lan driver, clearing CMOS...It's a B450 Aorus M with F50 Firmware. Any suggestions?
kshipper wrote: Jul 4, 2020 8:53:11 GMT -8 timate: There is a post by Colonelhop that deals with that...maybe have a search for it or send him a message or start a thread and he might see it =)
