Hot Plugging is mentioned in the manual. However, Hot Plug in not enabled. To be enabled, as on prior Gigabyte Motherboards, we would have to be able to change a SATA Port default behavior from SATA to eSATA or Hot Swap or Hot Plug. We cannot. We can only enable AHCI. The Bios, Chipset screen does not allow any port configuration.
We have the same issue on both Gigabyte X399 Designare and Gigabyte X399 Aorus Extreme. Hello Gigabyte? Where's Hot Plug enable capability? Yes NVMe RAID is off.
Aug 25, 2020 10:18:40 GMT -8 | buildorbuy likes this
Right now I'm Offline I have made 1,253 posts
I joined January 2020
I've received 115 likes
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I understand and knew from your previous videos about front access.
The O11 XL has 4 hot-swap bays in the back. Because the case is only 20" high, it fits on the end of the desk and I can stand on that side of the desk to access the back. But I really don't have a need for hot swap as you would. Looking forward to your video.
TRX40 Designare Hot Swap / Hot Plug... AHCI, Off or Auto. All or nothing. Cannot configure per SSD Port as before on 990FX Chipsets. Anyhow, this is better than what's on the X399 with just AHCI. Which is really dumb. Hello Gigabyte? Someone forgot to finish their work!
Anyway, Bios: F4c - Stable with all 256 GBs RAM.
New Bios: F4k - Has anyone tried it yet? Any anomalies?
philuk11 wrote: Apr 19, 2021 1:40:21 GMT -8 Found i needed to install the software from C: drive
philuk11 wrote: Apr 18, 2021 23:21:36 GMT -8 How do i get round the 'Windows cannot find 'C:\Users\xxx\AppData\Local\Temp\N3080VO.F3.exe'. Make sure you typed the name correctly, and then try again' *
hardcoregames wrote: Apr 16, 2021 17:52:21 GMT -8 what make/model of RAM do you have?*
toriga wrote: Apr 14, 2021 10:06:56 GMT -8 Somebody have tried PBO2 with 5900x (BIOS F33I)
Can you say your settings? I cant find stable settings.
kamiccolo wrote: Apr 13, 2021 15:53:41 GMT -8 Why is gigabyte support not replying to my questions? I submitted a question a week ago and no reply.
kamiccolo wrote: Apr 13, 2021 14:10:05 GMT -8 Why are you limiting my 3090 to 360w??
amchess wrote: Apr 13, 2021 12:29:32 GMT -8 Motherboard: GA-X99-Gaming 5 My cpu Intel® Xeon® E5-2699 v4 has a base fequency 2.20 Ghz, but CPUz shows it's working at 2.0Ghz.What I have to set in the bios to reach the correct base frequency? The multiplier is at 20.
agentx wrote: Apr 13, 2021 8:23:51 GMT -8 I'm getting the same error please help my bios is up to date.
barrybondz wrote: Apr 12, 2021 18:07:25 GMT -8 Anyone with a gigabyte board ever get a LAN error code 10? randomly? Z590 in my case. Clean install newest drivers ect.
luke007 wrote: Apr 12, 2021 13:19:48 GMT -8 Hello, is my GPU ok (RTX 3090 Gaming OC) as I know older revisions had stability issues and bad pins connecting to PSU, but my GPU has SN starts with 2106 so it's manufactured in 6 week of 2021 year, as I heard latest revisions from this year should be ok?*
kshipper wrote: Apr 11, 2021 10:32:54 GMT -8 snibblex: Take a look at BIOS update for that board. Later updates do address RAM issues*
snibblex4 wrote: Apr 11, 2021 10:27:22 GMT -8 would an update to Ryzen 7 3700X fix that ram-underclocking weakness?
snibblex4 wrote: Apr 11, 2021 10:26:25 GMT -8 Hey all, got a X370 Gaming 5 with Ryzen 7 1700. My RAM (4 x G.Skill Trident 3200 with Samsung chips) are only working at 1866 MHz. Cant activate XMP 2.0, because mobo resets the timings to standard, if i do.
wbloon wrote: Apr 10, 2021 14:46:58 GMT -8 Essentially a new build: MB: Gigabyte Aorus Ultra CPU: AMD Ryzen 5600X RAM: 4x8=32GB Two 1Tb M.2 NVMe SSD PCIe 4.0
Plan was to configure the two SSDs, in RAID 1, as the new “C” drive. Was able to get into BIOS on first few attempts but the Gigabyte manua
greggg wrote: Apr 9, 2021 15:00:14 GMT -8 Can anyone tell me the secret to getting gigabyte repair service to answer my attempts at contacting them? I want an X470 aorus board fixed ( cannot install windows) and am willing to pay for the work but I cannot connect with I guess, gigabyte...central
toriga wrote: Apr 9, 2021 10:43:19 GMT -8 From when i installed F33, i have my headset wireless of logitech that disconnect every 2 minutes and wifi that disconnect every 1 hour. Today i installed F33I and now my AUDIO CRACKLING. GYGABYTE FIX YOUR BIOS, I PAID MORE OF 400 EUR FOR THIS MOTHERBOARD.*
kshipper wrote: Apr 4, 2021 20:34:45 GMT -8 belmonte: Estoy usando el traductor de Google para comprender lo que me pregunta. ¿Cómo podemos ayudar?
belmonte wrote: Apr 2, 2021 1:34:40 GMT -8 Deseo presentarme pero es imposible escribir un post.
belmonte wrote: Apr 2, 2021 1:34:16 GMT -8 No puedo escribir, soy nuevo y necesito ayuda por favor, soy cliente de hace muchos años de Gigabyte y Fan.