Jun 29, 2017 14:11:21 GMT -8

Reply Quote | Like

	scottkitty Newbie	Right now I'm Offline I have made 4 posts I joined June 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Every once and a while I will get a usb port that wont get power at boot. Most of the time it doesnt happen but occasionally it will be the usb port for my keyboard so I will notice right away. Sometimes on my webcam I will be able to just reconnect it and it will work. Anyone have this issue?

Jun 30, 2017 3:52:53 GMT -8 | via mobile

Reply Quote | Like

Bas81
Guest

Had this issue when playing/testing with different voltage settings. But not since I found stable oc settings.

Jul 1, 2017 9:24:24 GMT -8

Reply Quote | Like

	sectoid Newbie	Right now I'm Offline I have made 27 posts I joined May 2017 I've received 1 like	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

I also have the K5 but do not have this problem. However, I have had almost all kinds of USB problems with this motherboard and it turned out the powered usb hubs were feedbacking power into the motherboard.

If you have any powered USB hubs, it may be worth a shot to remove their power source (even if this means relocating or disconnecting some high-power devices) and see if the problem vanishes.

If you want to take a look, here's the topic in which I asked for help with this problem:

forum.gigabyte.us/thread/1295/usb-power-supposed-work-possibility

Best of luck.

dammitflint wrote: Apr 19, 2021 14:07:23 GMT -8
"*Caution! For Intel® Celeron® users, this BIOS is limited to processors with 4MB Intel® Smart Cache, Intel Celeron® G5xx5 family ONLY!" is written under the most recent update.

dammitflint wrote: Apr 19, 2021 14:06:29 GMT -8
I have an h470 hd3 that I recently installed and I'm trying to update my bios from the f2 version. I'm only concerned as to which version to update to. I see that the latest bios update for this model has a warning that confuses me about whether its right.

philuk11 wrote: Apr 19, 2021 1:40:21 GMT -8
Found i needed to install the software from C: drive

philuk11 wrote: Apr 18, 2021 23:21:36 GMT -8
How do i get round the 'Windows cannot find 'C:\Users\xxx\AppData\Local\Temp\N3080VO.F3.exe'. Make sure you typed the name correctly, and then try again'
*

hardcoregames wrote: Apr 16, 2021 17:52:21 GMT -8
what make/model of RAM do you have? *

toriga wrote: Apr 14, 2021 10:06:56 GMT -8
Somebody have tried PBO2 with 5900x (BIOS F33I)

Can you say your settings? I cant find stable settings.

kamiccolo wrote: Apr 13, 2021 15:53:41 GMT -8
Why is gigabyte support not replying to my questions? I submitted a question a week ago and no reply.

kamiccolo wrote: Apr 13, 2021 14:10:05 GMT -8
Why are you limiting my 3090 to 360w?

amchess wrote: Apr 13, 2021 12:29:32 GMT -8
Motherboard: GA-X99-Gaming 5
My cpu Intel® Xeon® E5-2699 v4 has a base fequency 2.20 Ghz,
but CPUz shows it's working at 2.0Ghz.What I have to set in the bios to reach the correct base frequency? The multiplier is at 20.

agentx wrote: Apr 13, 2021 8:24:36 GMT -8
My PC specs: gigabyte aorus xtreme x399 tr4 CPU: 1950x RAm: hyperX fury 3466 mhz *

agentx wrote: Apr 13, 2021 8:23:51 GMT -8
I'm getting the same error please help my bios is up to date.

barrybondz wrote: Apr 12, 2021 18:07:25 GMT -8
Anyone with a gigabyte board ever get a LAN error code 10? randomly? Z590 in my case. Clean install newest drivers ect.

luke007 wrote: Apr 12, 2021 13:19:48 GMT -8
Hello, is my GPU ok (RTX 3090 Gaming OC) as I know older revisions had stability issues and bad pins connecting to PSU, but my GPU has SN starts with 2106 so it's manufactured in 6 week of 2021 year, as I heard latest revisions from this year should be ok? *

kshipper wrote: Apr 11, 2021 10:32:54 GMT -8
snibblex: Take a look at BIOS update for that board. Later updates do address RAM issues *

snibblex4 wrote: Apr 11, 2021 10:27:22 GMT -8
would an update to Ryzen 7 3700X fix that ram-underclocking weakness?

snibblex4 wrote: Apr 11, 2021 10:26:25 GMT -8
Hey all, got a X370 Gaming 5 with Ryzen 7 1700. My RAM (4 x G.Skill Trident 3200 with Samsung chips) are only working at 1866 MHz. Cant activate XMP 2.0, because mobo resets the timings to standard, if i do.

wbloon wrote: Apr 10, 2021 14:46:58 GMT -8
Essentially a new build:
MB: Gigabyte Aorus Ultra
CPU: AMD Ryzen 5600X
RAM: 4x8=32GB
Two 1Tb M.2 NVMe SSD PCIe 4.0

Plan was to configure the two SSDs, in RAID 1, as the new “C” drive.
Was able to get into BIOS on first few attempts but the Gigabyte manua

greggg wrote: Apr 9, 2021 15:00:14 GMT -8
Can anyone tell me the secret to getting gigabyte repair service to answer my attempts at contacting them? I want an X470 aorus board fixed ( cannot install windows) and am willing to pay for the work but I cannot connect with I guess, gigabyte...central

toriga wrote: Apr 9, 2021 10:43:19 GMT -8
From when i installed F33, i have my headset wireless of logitech that disconnect every 2 minutes and wifi that disconnect every 1 hour. Today i installed F33I and now my AUDIO CRACKLING. GYGABYTE FIX YOUR BIOS, I PAID MORE OF 400 EUR FOR THIS MOTHERBOARD. *

kshipper wrote: Apr 4, 2021 20:34:45 GMT -8
belmonte: Estoy usando el traductor de Google para comprender lo que me pregunta. ¿Cómo podemos ayudar?