For Mesh Ratio and its voltage, I set them to x31 with 1.22V. Since x32 for me will cause blue-screen, I want to know your voltage settings. If you leave Mesh Voltage "Auto", please run Prime95 and checked HWiNFO, which will show the Mesh Voltage during Prime95 is running. I want to know your voltage with 3200MHz Mesh Clock.
For CPU VRIN External Override Voltage, why you set it to 1.9? Did you see any difference and improvement compared to "Auto".
I set VRIN to 1.9 to account for Vdroop. If you run at 46x without adjusting VRIN your benchmark scores will be super low. Like less than stock. Its because the CPU isn't getting enough power. The 2 ways to counter act this are setting VRIN to 1.85+ (I use 1.9) or setting LLC to Turbo/Extreme. Then your benchmarks will shoot back up.
For Mesh I set 32x, leave it on AUTO. In windows under load:
Voltage min: .8 Voltage max: 1.2 Load: 1.19 Clock min: 2300 Clock Max: 3,200 Under load: 3199.9
Right now I'm Offline I have made 7 posts
I joined July 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I'm seeing the entire BIOS getting reset back to default values after a wake from sleep (S3) in Windows 10. If I then go to enter the BIOS setup after rebooting, it gives the warning that the BIOS has been reset. This is on a X299 Gaming 9 with F6A and F6E both. Processor is an i9-7900X.
Right now I'm Offline I have made 16 posts
I joined July 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Matt,
I've configured my BIOS settings exactly per your recommendation and yet, in demanding games, my CPU clock speed still wildly fluctuates. I can also not get the CPU speed to remain at the 4.6GHz value I've specified, even after disabling the power saving settings you highlighted.
Seems to me that there are still some fundamental BIOS issues to resolve. Can you update us on the next planned release?
I've configured my BIOS settings exactly per your recommendation and yet, in demanding games, my CPU clock speed still wildly fluctuates. I can also not get the CPU speed to remain at the 4.6GHz value I've specified, even after disabling the power saving settings you highlighted.
Seems to me that there are still some fundamental BIOS issues to resolve. Can you update us on the next planned release?
Thanks,
Ady
Just posted a new F6F BIOS for Gaming 9. I cannot reproduce any fluctuation on my board. You have C1, C6/C7, and Intel speedshift disabled? If so it sounds like your CPU is thermal throtteling. If its for instance going down to 1200GHz you need to look at temps.
I've configured my BIOS settings exactly per your recommendation and yet, in demanding games, my CPU clock speed still wildly fluctuates. I can also not get the CPU speed to remain at the 4.6GHz value I've specified, even after disabling the power saving settings you highlighted.
Seems to me that there are still some fundamental BIOS issues to resolve. Can you update us on the next planned release?
Thanks,
Ady
Just posted a new F6F BIOS for Gaming 9. I cannot reproduce any fluctuation on my board. You have C1, C6/C7, and Intel speedshift disabled? If so it sounds like your CPU is thermal throtteling. If its for instance going down to 1200GHz you need to look at temps.
Hi Matt,
No, the fluctuations are quite subtle, from 4.6GHz to 4.4GHz and then some cores drop to 3.7GHz. So not thermal throttling, just odd goings on.
I'll try the new BIOS if you can please give us the correct link (the new F6F link goes to the F6E bios).
Right now I'm Offline I have made 16 posts
I joined July 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Should've also said that temps are perfectly fine and yes, I have disabled everything you mention there. I'm using a full custom loop and, under 100% load at 4.6GHz, the CPU doesn't get above 85.
Something is wrong with the "TJ-Max Offset". It can be set to "Auto" and "1"-"40". But it won't be adjusted properly. Need to fix it in next BIOS update.
Just set a offset of 8 on F6E and you will only get a fluctuation of 2 degrees
Iam testing f6e on 5.0 and getting good results will be posting profile up soon fo testing
Notice that wc loop is required
Please every one disable fast resume (hibernation) you can turn this off on the windows 10 tab that say what buttons do your case buttons as on f6e is reseting some settings on
greggg wrote: Mar 3, 2021 11:03:15 GMT -8 I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?
squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8 You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi
reddorki wrote: Mar 1, 2021 4:06:13 GMT -8 ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory.*
ironlump wrote: Feb 28, 2021 3:37:41 GMT -8 So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment???
jeerus wrote: Feb 27, 2021 14:44:40 GMT -8 Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage
ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8 I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!
yair wrote: Feb 27, 2021 5:12:44 GMT -8 I have a problem booting from usb disdonkey
jozef wrote: Feb 22, 2021 2:03:14 GMT -8 i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME
mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8 Hello!
I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.
The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The
andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8 Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.
andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8 Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :
overxpg wrote: Feb 16, 2021 20:07:34 GMT -8 Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a
eldio wrote: Feb 16, 2021 5:00:09 GMT -8 Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios
grandi wrote: Feb 15, 2021 3:38:57 GMT -8 Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!
amelin00 wrote: Feb 12, 2021 13:20:45 GMT -8 so i have heard that with the new pcie 4.0 gpu´s this will not be a problem?
??
