Jun 23, 2017 8:42:42 GMT -8 | uplink likes this

Reply Quote | Like

	GIGABYTE - Matt Ultra	Right now I'm Offline I have made 710 posts I joined July 2016 I've received 233 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter
No Longer works for Gigabyte

Please note: Only BIOS listed on gigabyte's main support page are official tested BIOS. The one's provided below are for testing purposes and are not meant for general release. They may include unintentional bugs or quarks. Please share your experience with other members so we can help tweak and improve each new version.

Edit:

Most of the Older Beta links are dead and will be removed as I have time to go through them. intender

X299x

X299X AORUS XTREME WATERFORCE F3g

X299X AORUS MASTER F3c

X299X DESIGNARE 10G F3c

Older BETA BIOS:

X299 AORUS Gaming 9	F7B
X299 AORUS Gaming 7	F8B

Change Log:

Adjust Vcore voltage tables under load (lower)

X299 AORUS Gaming 9	F7A
X299 AORUS Gaming 7	F8A
X299 AORUS Gaming 3	F7A
X299 AORUS Gaming	F2
X299 AORUS Ultra Gaming	F3
X299 UD4	F5B

X299 AORUS Gaming 9: F6L
X299 AORUS Gaming 7: F7I

Change Log:

Fixed MESH sleep bug.
TJMax offset is not just TJMAx.
- TJMax allows you to set a specific temperature between 80C and 105C.

X299 AORUS Gaming 3: F6I
X299 AORUS Gaming 9: F6I

Change log:

Fixed TB3 menu disappearing in BIOS
TJMax offset adjustments:
- Max chip spec TJMax is 120C. This is the baseline.
- GIGABYTE max TJMax is 105C. This is the ceiling.
- Default TJMax is 95C.

TJMax offset formula is: 120 - TJMax offset = TJMax in Windows. Thus to set TJMax in windows to 100, set TJMax offset to 20 (120-20=100).
If you set TJMax offset to less than 15 you will see a TJMax in windows for 105C.

X299 AORUS Gaming 3: F6H
X299 AORUS Gaming 7: F7H

X299 AORUS Gaming 9: F6H

Change log:

AVX/AVX512 can now be set to 0 manually.
Setting VRIN to 1.9 should no longer be necessary for Air/H20 overclocking.

X299 AORUS Gaming 3: F6F
X299 AORUS Gaming 9: F6F
X299 AORUS Ultra Gaming: F3C

Change log:

Fixed TJMax offset. Should now be set to 105C when overclocking
Adjusted VRIN when overclocking 4.4+
AVX set to 0 when overclocking.

Added "Enhanced Multi-core Performance"

Sets all cores to match turbo ratio

Refined Intel Turbo Boost

Want to OC? Check out the thread here.

Edited Jul 31, 2020 5:38:37 GMT -8 by intender

Jun 23, 2017 8:42:56 GMT -8

Reply Quote | Like

	GIGABYTE - Matt Ultra	Right now I'm Offline I have made 710 posts I joined July 2016 I've received 233 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter
No Longer works for Gigabyte

FAQ

Q: What is "Enhanced Multi-Core Performance Mode"?

Intel Turbo Boost 3.0 picks two cores to run at 45x, the rest will run 40x. With EMCP all cores will be boosted to 45x.

Q: Isn't that the same as overclocking?

Yes and no. Typically when overclocking users have to sacrifice using P-states. This creates excess heat when idle. EMCP keeps all the power saving features but pushes Turbo 3.0 to all cores when under load.

Q: What about power modes, which should I use when testing?

Both balanced and high performance power modes will work with EMCP.

Edited Jun 27, 2017 14:57:28 GMT -8 by GIGABYTE - Matt

Jun 23, 2017 8:43:05 GMT -8

Reply Quote | Like

	GIGABYTE - Matt Ultra	Right now I'm Offline I have made 710 posts I joined July 2016 I've received 233 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter
No Longer works for Gigabyte

Open issues / Things we are working on for upcoming BIOS:

TJMax offset sets TJMax to 105 no matter what you set in BIOS.
TB3 menu only shows after loading defaults.

Edited Jul 21, 2017 8:27:49 GMT -8 by GIGABYTE - Matt

Jul 8, 2017 3:13:10 GMT -8

Reply Quote | Like

	MDK_pt Moderator	Right now I'm Offline I have made 85 posts I joined July 2017 I've received 3 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter YouTube

hi matt i have sent a PM and you have not replied !

whats the change log for F6E beta on the gaming 9
?

cheers

My Signature...

Jul 8, 2017 7:33:54 GMT -8

Reply Quote | Like

ady7970-guest
Guest

Hey,

can an you please share how you were able to achieve the over Lockerbie on the G9 board? Have you been able to get it running at that speed constantly in Windows? I.e. With no power management affecting things? Would you please be able to share screenshots of your BIOS to help people like me out?

thanks!

Jul 8, 2017 14:15:47 GMT -8

Reply Quote | Like

	MDK_pt Moderator	Right now I'm Offline I have made 85 posts I joined July 2017 I've received 3 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter YouTube

Jul 8, 2017 7:33:54 GMT -8 ady7970-guest said:

on F6A use vcore in normal a add + 45

multiplier to 49 and bclk from auto to 100.1

my mem is tuned up also on timings

here is my youtube channel www.youtube.com/channel/UCZEYWxiBuQQn5vg5a3-i6dg

iam going to post a guide on how to oc

Heads up on F6E it is buggggggyy as hell what ever i do i canot get past 4.700mhz on windows on the bios the cpus sets to 4.8 4.0 or 5.0 what ever you set it but windows does not get that multi

Fix it

cheers

My Signature...

Edited Jul 20, 2017 13:41:16 GMT -8 by MDK_pt

Jul 8, 2017 18:09:44 GMT -8

Reply Quote | Like

	cuewarstaner Newbie	Right now I'm Offline I have made 29 posts I joined July 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.
X299, 7900X, AORUS Gaming 7

I am waiting for your Guide! It's fabulous! I am have no idea how to oc with this board. I set fixed frequency and turned off Turbo 3.0. But all my core were not going to the fixed frequency. And I checked HWinfo and saw Thermal Throttling was set to Yes for some cores of my 7900x.

I searched "Thermal Throttling" on google and figured out it is to help decrease voltage and frequency when Core(s) is(are) overheat.

But I don't want those settings. I want to test how high my CPU can go and determine which frequency I should stay at.

So confused now...xD

I also want to set CPU per core limit just like ASUS's UEFI BIOS does, instead of all cores sync. But I didn't find this option in BIOS. Instead, there is a option called "Turbo Per Core Limit Control." I don't know about it too much but I believe it is for Intel Turbo Technology. But I don't want to use Turbo. Is there any way for me to set cores ratio like this(see below) without using Intel Turbo Technology?

[Core1-4]4.7GHz

[Core5-10]4.0GHz

Respect

Taner

Jul 9, 2017 0:21:05 GMT -8

Reply Quote | Like

	MDK_pt Moderator	Right now I'm Offline I have made 85 posts I joined July 2017 I've received 3 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter YouTube

Jul 8, 2017 18:09:44 GMT -8 cuewarstaner said:

Taner

www.filedropper.com/oc4 NOTE - its for the i9 7900X

here is a profile for bios F6A for 4.8

mem in this profile is set to AUTO as i dont no your memory settings

if every thing goes well all 10 cores will be at 4800 when you put some load on it but also use this settings in windows

But awsering you you can set what ever per core just type it direct in the core and it will set it

Enhanced Multi-Core Performance Mode sets// sets the turbo to ALL 10 cores if you are using 7900x

PS- if any one needs help Just ask !

cheers

My Signature...

Edited Jul 9, 2017 0:40:25 GMT -8 by MDK_pt

Jul 9, 2017 23:15:19 GMT -8

Reply Quote | Like

	MDK_pt Moderator	Right now I'm Offline I have made 85 posts I joined July 2017 I've received 3 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter YouTube

a Suggestion for Gigabyte is on the bios like all other manufactures give a small description when hovering or someting every function

all the bios have CPU spread function on AUTO and grayed out cant select it

CPU UPGRADE - is gone none of 3 latest bios have it

Once more the latest BETA f6E for X299 gaming 9 does not set nothing above 4700mhz it does not show in the OS

cheers

My Signature...

Jul 10, 2017 1:26:17 GMT -8

Reply Quote | Like

	cuewarstaner Newbie	Right now I'm Offline I have made 29 posts I joined July 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.
X299, 7900X, AORUS Gaming 7

My suggestions for Overclocking(not Turbo Boost)

There is no "Per Core Ratio Limit" in the BIOS. But this is very important for us. With the EasyTune software we are able to set the per core ratio limit. But it is a software controlled method. Most of us would love to overclock with BIOS settings.

Can you add "Per Core Ratio Limit" setting in the future BIOS?

Jul 10, 2017 14:58:00 GMT -8

Reply Quote | Like

	GIGABYTE - Matt Ultra	Right now I'm Offline I have made 710 posts I joined July 2016 I've received 233 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter
No Longer works for Gigabyte

Jul 10, 2017 1:26:17 GMT -8 cuewarstaner said:

Just to clarify you want to set each core's multiplier and have it run at that speed 24/7?

Right now you have 2 options for per core tuning in BIOS, however they will only be applied under load (not 24/7 even when idle). They are both found under Advanced Frequency settings -> Advancec CPU core Settings:

Turbo Ratio (X-Cores Active) - This will set the multiplier to X number of cores when under load. IE you set 1-Core Active to 50x and run a single thread benchmark, whatever core the load is on will run at 50x.

Turbo Core X Ratio Limit - This sets a multiplier limit on a specific core #, it does not apply to the amount of cores under load. <-- I believe this is will do what you want. You can set each core's max multiplier individually.

P.S. We should have an OC guide up by the end of the week! Here are the settings I use for 4600Mhz:

1. Enter advanced frequency settings.

2. Change CPU Clock Ratio to 45-47. (My CPU caps at 46)

3. Enable XMP.

4. Enter Advanced CPU Core Settings

5. Set CLR (MESH) Ratio to 32.

6. Set Enhanced Multi-core Performance to Enabled.

7. Set Energy Efficient Turbo to Disabled.

8. Hit ESC twice then enter Advanced Voltage Settings

9. Enter CPU Core Voltage Control

10. Set CPU VRIN External Override to 1.9

11. Hit F10 to Save and Exit.

Edited Jul 10, 2017 15:04:46 GMT -8 by GIGABYTE - Matt

Jul 10, 2017 19:14:58 GMT -8

Reply Quote | Like

	cuewarstaner Newbie	Right now I'm Offline I have made 29 posts I joined July 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.
X299, 7900X, AORUS Gaming 7

For Mesh Ratio and its voltage, I set them to x31 with 1.22V. Since x32 for me will cause blue-screen, I want to know your voltage settings. If you leave Mesh Voltage "Auto", please run Prime95 and checked HWiNFO, which will show the Mesh Voltage during Prime95 is running. I want to know your voltage with 3200MHz Mesh Clock.

For CPU VRIN External Override Voltage, why you set it to 1.9? Did you see any difference and improvement compared to "Auto".

Jul 10, 2017 23:46:33 GMT -8

Reply Quote | Like

	MDK_pt Moderator	Right now I'm Offline I have made 85 posts I joined July 2017 I've received 3 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter YouTube

Jul 10, 2017 14:58:00 GMT -8 GIGABYTE - Matt said:

Jul 10, 2017 1:26:17 GMT -8 cuewarstaner said:

hello , i use the same settings i do turn off the 2 C states off i does change the TBT 3.0 to legacy any diference on native to legacy ? do you think its better to use the LOAD line calibration or the vrin ?

also turning the c stats off but leaving intel EIST on gives better results and the variance still exists when not using the cpu , also turbo energiy efficience should be off

cheers

My Signature...

Edited Jul 10, 2017 23:52:23 GMT -8 by MDK_pt

Jul 11, 2017 1:32:41 GMT -8

Reply Quote | Like

	cuewarstaner Newbie	Right now I'm Offline I have made 29 posts I joined July 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.
X299, 7900X, AORUS Gaming 7

Something is wrong with the "TJ-Max Offset". It can be set to "Auto" and "1"-"40". But it won't be adjusted properly. Need to fix it in next BIOS update.

Jul 11, 2017 10:51:14 GMT -8

Reply Quote | Like

	GIGABYTE - Matt Ultra	Right now I'm Offline I have made 710 posts I joined July 2016 I've received 233 likes	My gender is Male	I currently have no messenger contact information filled out.	Facebook Twitter
No Longer works for Gigabyte

Jul 11, 2017 1:32:41 GMT -8 cuewarstaner said:

Something is wrong with the "TJ-Max Offset". It can be set to "Auto" and "1"-"40". But it won't be adjusted properly. Need to fix it in next BIOS update.

Can you elaborate? I can set up to +11 to get a TJMax of 105.

hardcoregames wrote: Mar 5, 2021 22:05:49 GMT -8
www.hardcoregames.ca/2021/03/05/rtx-3060-for-99999/

gabeomatic wrote: Mar 3, 2021 18:28:57 GMT -8
If anyone can chime in and give me some ram OC tips in my thread I'd really appreciate it! forum.gigabyte.us/thread/11741/z390m-gaming-hynix-3600mhz-tuning

hardcoregames wrote: Mar 3, 2021 11:19:08 GMT -8
Anybody running into PSU issues? www.hardcoregames.ca/2021/03/03/gigabyte-gp-p850gm-psu-failures/

greggg wrote: Mar 3, 2021 11:03:15 GMT -8
I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?

squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8
You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi

reddorki wrote: Mar 1, 2021 4:06:13 GMT -8
ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory. *

ironlump wrote: Feb 28, 2021 3:37:41 GMT -8
So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment?

jeerus wrote: Feb 27, 2021 14:44:40 GMT -8
Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage

ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8
I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!

yair wrote: Feb 27, 2021 5:12:44 GMT -8
I have a problem booting from usb disdonkey

xavdeman wrote: Feb 22, 2021 11:26:47 GMT -8
someone from Realtek actually replied to a support ticket and is asking for Wireshark captures:
forum-en.msi.com/index.php?threads/realtek-pcie-2-5gbe-family-controller-resetting.345823/page-11#post-2041042

jozef wrote: Feb 22, 2021 2:03:14 GMT -8
i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME

mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8
Hello!

I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.

The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The

balders wrote: Feb 18, 2021 18:48:33 GMT -8
Gigabyte has pulled F13a from www.gigabyte.com/Motherboard/B550I-AORUS-PRO-AX-rev-10/support#support-dl-bios

andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8
Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.

andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8
Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :

overxpg wrote: Feb 16, 2021 20:07:34 GMT -8
Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a

eldio wrote: Feb 16, 2021 5:00:09 GMT -8
Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios

grandi wrote: Feb 15, 2021 3:38:57 GMT -8
Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!

amelin00 wrote: Feb 12, 2021 13:20:45 GMT -8
so i have heard that with the new pcie 4.0 gpu´s this will not be a problem?