Right now I'm Offline I have made 6 posts
I joined May 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Hello everyone,
I purchased the named board along with G.Skill Ripjaws 4 - 2800 Ram, which I can't get to work with more than 2133 MHz. And now I am looking for reasons and saw, that the VCore SOC is at 0,7V. What I have read so far, this is fairly low and might be a reason for RAM instabilities.
Am I right? Or what else can cause the instabilities?
Right now I'm Offline I have made 122 posts
I joined April 2017
I've received 10 likes
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Are you sure this is correct? You should not be able to boot at that voltage. Most people are running SOC at least 0.9v. The AMD rep who did a talk said if you have memory stability issues you should set it to at least 1.1v.
I purchased the named board along with G.Skill Ripjaws 4 - 2800 Ram, which I can't get to work with more than 2133 MHz. And now I am looking for reasons and saw, that the VCore SOC is at 0,7V. What I have read so far, this is fairly low and might be a reason for RAM instabilities.
Am I right? Or what else can cause the instabilities?
Thanks for every hint!
P.S. My CPU is an R5 1600.
You should consider bumping it up, and then trying higher frequency. Also if needed, add some extra V to the RAM itself too.
I have my HyperX Predator at 2933 with XMP2 profile 2, and my SOC goes auto from 0.85V to 0.9V.
Right now I'm Offline I have made 58 posts
I joined March 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Pretty sure I have the same kit. Mine runs at 2933c14-15-16-15 @ 1.32v vDIMM (not sure that's absolutely necessary, but doesn't hurt). SoC is set to Auto, but I don't think it's that low. Bump it up a bit.
Right now I'm Offline I have made 6 posts
I joined May 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Hey, thanks for your replies. I am sure about the VCore, at least about that what I can see. I attached a screenshot. Btw, my Bios is F6 and it makes now difference if I set it to "auto" or "normal". Could it be a bug?
Edit: Okay. I set the VCore SOC to +0.3Volt (Maximum) and have now 1.0V. I am now able to set the RAM to 2666 MHz but don't know whether this is stable.
Right now I'm Offline I have made 6 posts
I joined May 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Well, the settings are stable. But as I wrote, I am only able to push the VCore SOC to 1.0 Volt. And I would like to know whether this is a bug or defect. In the later case, I have to reclaim the board. So please Gigabyte, tell me what's wrong?
Well, the settings are stable. But as I wrote, I am only able to push the VCore SOC to 1.0 Volt. And I would like to know whether this is a bug or defect. In the later case, I have to reclaim the board. So please Gigabyte, tell me what's wrong?
Hi thebaer. Can I suggest you try Ryzen Master from AMD? I found it way more intuitive than the BIOS.
Right now I'm Offline I have made 6 posts
I joined May 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Hi BitCrusher,
I already used it but it doesn't solve the problem. I need a SOC Voltage higher than 0.7V to even boot up, so I used to use the bios settings. Furthermore, Ryzen Master doesn't take into account the bios settings. For example, if I add 0.1 V in the Bios, the system starts with 0.8 but Master reports 0.7V. If I set the voltage to 0.8 using the Master it adds further 0.1V and I end up with 0.7+0.1+0.1=0.9V. Totally strange....
greggg wrote: Mar 3, 2021 11:03:15 GMT -8 I can't get gigabyte warranty service to respond to an RMA. Keep getting an error message saying 'server error. Please try again later. I have been trying since last November. Anyone else have this problem?
squallrinoa89 wrote: Mar 1, 2021 10:45:03 GMT -8 You hook the fans to the CPU header... Should be fine. I have a X73 and works fine on my Pro Wifi
reddorki wrote: Mar 1, 2021 4:06:13 GMT -8 ricks22: Seems all AMD based motherboards of Gigabyte suffer from the same issue. Has 3 of them, AB350 Gaming 3, X470 Aorus Gaming Ultra and a X570 Aorus Ultra. None of them is hitting the rated XMP values of the memory.*
ironlump wrote: Feb 28, 2021 3:37:41 GMT -8 So I have an X570 Pro Wifi and AMD Ryzen7 5800X.... this will not work at the moment???
jeerus wrote: Feb 27, 2021 14:44:40 GMT -8 Someone knows how to disable cpu fan control, installed a NZXT Kraken today but it's making grinding noise because the Mobo isnt giving enough speed / voltage
ricks22 wrote: Feb 27, 2021 6:14:43 GMT -8 I have A B550 Pro, Rev 1, with the latest BIOS. I installed G Skill Trident Z Neo. 3600. Turning on XMP, does get me to almost 3600. Level 2 and Level 3 XMP have no effect. Any ideas about what my problem is? I will download the Ryzen DRAM calculator!
yair wrote: Feb 27, 2021 5:12:44 GMT -8 I have a problem booting from usb disdonkey
jozef wrote: Feb 22, 2021 2:03:14 GMT -8 i have a PROBLEM WITH THE Z490 MASTER IT GO,S NO FUIRTHER THAN POST 10 NO BIOS I CAN DO ANY THING I SWAPED MEMORY A NOTHER PSU WHO COULD HELP ME
mahmoud1995 wrote: Feb 21, 2021 15:45:27 GMT -8 Hello!
I have problem with recently bought Gigabyte AC300W Rev.1, I reffer to the LED on this case.
The RGB Logo and lights on the front of the case and on the side were working beautifully in a cyclic manner changing colors smoothly last whole week. The
andreigrum wrote: Feb 18, 2021 8:42:19 GMT -8 Fixed by a Win reinstall to UEFI. Old install was non-UEFI and I guess this was causing the problem. Still since F11 was working this proves there might be an issue with no-UEFI installs on F20 and F30.
andreigrum wrote: Feb 18, 2021 4:03:10 GMT -8 Hi. I got a X570 Aorus Elite. Everyone figured out how to fix MB not turning off on shutdown/Restart if BIOS is grater then F11? I tried all F2x/F3x, same behavior. Even reset btn stops working, so I have to keep Pwr btn pressed 10 sec. Thanks in advance :
overxpg wrote: Feb 16, 2021 20:07:34 GMT -8 Good Night everyone, I have a doubt, I have an X570 Aorus Elite, Ryzen 3800X and 16gb RAM 3600mhz, my motherboard is in the Bios F3, the latest is the F33a, but there are 8 versionsGood Night everyone, I have a doubt, own an X570 Aorus Elite, Ryzen 3800X a
eldio wrote: Feb 16, 2021 5:00:09 GMT -8 Hi, I got a computer at the beginning of the year and it has a B460M DS3H AC-Y1 motherboard. I have been through 3 different companies trying to update bios. they all tell me to come here yet your software won't even recognize it. I am stuck at F1 Bios
grandi wrote: Feb 15, 2021 3:38:57 GMT -8 Habe mainboard z490 aorus pro ax! (Kauf dezember 2020) kann uhrzeit, datum und sonstige einstellungen nicht speichern! am tag darauf sind alle einstellungen wieder weg! (datum, uhrzeit ect...) habe schon die knopfbatterie gewechselt, brachte aber nichts!
amelin00 wrote: Feb 12, 2021 13:20:45 GMT -8 so i have heard that with the new pcie 4.0 gpu´s this will not be a problem?
amelin00 wrote: Feb 12, 2021 13:20:22 GMT -8 I know that you can use the first m.2 slot and still get x16 on the gpu but if i want to use the second m.2 aswell then the gpu will run at x8
)
??
