I resently I bought a z490 uc ac (rev 1.0) motherboard with i7 10700k.
the ram show ok.
I try to install windows 10 on it, but the drivers not show on it.
I update bios to version F6c
i just install the m.2 on the M2A port and bios show it.
the m.2 is WDS500G2B0C-00PXH0( SN550 NVMe 500 gb WesterDigital)
i try with intel rapid storage tech and without it.
i download windows with usb stick, i use rufus with iso and nothing.
the diskpart find the disk, and convert to primary partition, convert to mbr, gtp
I enabled CSM Support with EUFI on all parts
I configure sata mode on AHCI and intel RST
when windows install not found the driver, i search the driver download from the motherboard page, and not show the m.2 unit.
the screen is like this.
I use a Ubuntu usb to try to install it, and work fine, detect the disk fine.
the same problem happens when i try to put a simple ssd from other pc.
Anyone had this problem or know what is the bios configuration for this. i try a lot of combinations and nothing. i dont know if this
is a windows install problem or not, first time to happens to me. and first time i try with m.2
if my syntax is wrong, sorry for that, english is not my native language.
thx 4 read it