Right now I'm Offline I have made 24 posts
I joined August 2019
I've received 1 like
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Just updated to F31H bios on my x570 Aorus Elite with 5800x CPU, and my audio is constantly clipping and distorting, unable to listen or watch anything. Any suggestions, or should i flash the old bios back?
Right now I'm Offline I have made 24 posts
I joined August 2019
I've received 1 like
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I have the same problem but with onboard sound card and the latest bios F31h, reverted back to F31e and the problem is gone. I suggest you to open support ticket as me.
Right now I'm Offline I have made 4 posts
I joined November 2020
I've received 1 like
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
If you're curious as to what is causing it, it's the IF not getting enough voltage when OCing or turning on XMP. Reverting to the previous version should fix it, but upping VDDG, SOC and VDDP voltages can fix it too.
If you're curious as to what is causing it, it's the IF not getting enough voltage when OCing or turning on XMP. Reverting to the previous version should fix it, but upping VDDG, SOC and VDDP voltages can fix it too.
Right now I'm Offline I have made 4 posts
I joined November 2020
I've received 1 like
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
IF is the Infinity Fabric, which may get OC'd if your XMP has a high enough MHz, as designed. For whatever reason F31h doesn't seem to deliver enough voltage in some manner when everything is on auto.
AFAIK XMP/RAM speed above 2133 is considered OC (please correct if different for ryzen 5000).
IF is the Infinity Fabric, which may get OC'd if your XMP has a high enough MHz, as designed. For whatever reason F31h doesn't seem to deliver enough voltage in some manner when everything is on auto.
AFAIK XMP/RAM speed above 2133 is considered OC (please correct if different for ryzen 5000).
Its not that, and XMP is OC for the RAM, not the CPU, and XMP basically means that the RAM manufacturer guarantees this OC (similar to GPU partners who release OC GPU versions), however this does not mean that the CPU will support it, but AMD has announced that Ryzen 5000 is compatible with up to 4000 ram, this was cleared by AMD and this is not OC on the CPU which drops your CPU guarantee. There was a great debate about it as one company shipped all their PC's without XMP enabled, users became angry and then Intel and AMD both stated that XMP does not drop your CPU guarantee as this is not considered OC on the CPU.
The sound problem with the today bios 31J, has been fixed.
Right now I'm Offline I have made 24 posts
I joined August 2019
I've received 1 like
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Well updated to 31L and the problem reappeared.
I noticed that when with 31J, the CPU clocks all cores to 4450 while with 31H and 31L it goes to 4550, also made a test, disabled XMP on my Trindent Neo Z, and the sound issue is gone on 31L.
skizzdog wrote: Jan 24, 2021 16:54:39 GMT -8 Hello I just built a pc using the Gig Z390 M Gaming board.I cannot figure out what drivers to load first.Idont have the CD that came with the board.Can i buy one some place.
arvindh wrote: Jan 22, 2021 18:49:37 GMT -8 Hi,im having 3HD(win10 & Mint) on Aorus B450.now want to install 4th HD with debian10.Is my current setup legacy/UEFI? what care should i take before installing 3rd OS on 4th HD.forum.gigabyte.us/thread/11477/b450-multiboot-legacy-uefi*
razor9103 wrote: Jan 22, 2021 12:00:23 GMT -8 New Z490 Vision D won't boot ... stuck at RED CPU error LED
lima567 wrote: Jan 20, 2021 15:13:51 GMT -8 intender thank you, will try doing that.
masc2279 wrote: Jan 20, 2021 10:45:24 GMT -8 polarox - need more info what board what block version ... I can tell you that I have the EKWB EK-Quantum Momentum TRX40 Aorus Master Monoblock and that block is worth every penny i went thru 3 different solutions and this one is insanely good.
polarox wrote: Jan 20, 2021 8:03:32 GMT -8 hi guys,
does anyone have the bitspower or EK monoblock for this motherboard? Is it worth the money?
intender wrote: Jan 19, 2021 11:55:39 GMT -8 lima567 this is a windows 10 20h2 issue. I had the same thing on one of my computers. I was never able to get logged back into my account on that PC. I moved that drive to another computer and copied over all data I wanted to keep and did a clean install.
joeym wrote: Jan 19, 2021 8:52:33 GMT -8 Is Asus working on a solution for the Intel 300 series?
lima567 wrote: Jan 18, 2021 20:02:50 GMT -8 Have issue “Something happened and your PIN isn’t available. Click to set up your PIN again.” (I disabled start up applications. Trying to get to save mode, when press F12, chose Windows boot, hit enter - gets me back to sign in page. Please help
sozehh wrote: Jan 18, 2021 13:42:41 GMT -8 soooo NOW ASUS is working on resizable bar too....GIGABYTE?
sozehh wrote: Jan 16, 2021 10:58:58 GMT -8 joeym ofc i've done it, signed and trying to spread the petition, gigabyte do your work please and add resizable bar for intel 300 series, it is not an old product, people like me spent 800 euros on aorus xtreme, don't tell me i have already an outdated mb
joeym wrote: Jan 16, 2021 7:15:27 GMT -8 I would strongly recommend that anyone who hasn't already signed the petition do so now. If you already signed it, please share it! This may help encourage all other motherboard manufacturers to follow suite. Link to the petition: chng.it/LKLksG4yQv
iuliug wrote: Jan 15, 2021 16:31:07 GMT -8 Yes ADD BAR support for all boards that support it - but GB will ignore this
vigo wrote: Jan 15, 2021 9:35:47 GMT -8 what is resizable BAR ?
desaccorde wrote: Jan 15, 2021 0:50:15 GMT -8 300 Series MUST be supported, no other way. MSI supports it. They may think they're pushing their customers for a premature upgrade, but guess what? Even if I upgrade, I wouldn't buy a Gigabyte board. Me and all my close friends will never buy Gig again.
johnyb0y wrote: Jan 14, 2021 4:58:11 GMT -8 @gigabyte, I've personally built with half a dozen of your boards and recommended you at least 5 times last year. This will stop if you screw Z390 users with not supporting Re-BAR.*
mezzer wrote: Jan 14, 2021 2:23:19 GMT -8 This will be my last gigabyte mobo if there's no resize bar support on 300 series.
