According to the Stasio thread...this one supports SAM, with another bios version in a couple of days...
EDIT: Good News: XMP settings are now working again and will accept manual timing overrides, just as they did before! Apparently my "funky" 4x8GB ram setup is not as funky as I thought and the 31g bios runs fine in XMP with my faster manual timings written in! F31 or F32 is probably right around the corner.
My Signature... Windows10x64 Pro v2004, build 21296.1000 AMD 50th Anniversary 5700XT Aorus Master x570 F32 Corsair HX-850 PSU (72a x1 12v rail) AMD Ryzen 9 3900X RAM 32GB 4x8GB, Patriot Viper Steel @ 3733MHz @1.35v LG MultiDrive DVD writer Boot: Samsung 980 Pro 500GB PCIe4 Samsung 960 EVO NVMe 250GB 2x 1TB WD Blue 7200 rpm ST2000DM SATA 3 2TB ST4000DM004 S3 4TB Wired Ethernet 105Mb/s BenQ EW-3270U 4k, HDR10 monitor
Right now I'm Offline I have made 7 posts
I joined November 2020
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Wow this is awesome. im on a 5900x + X570 Master combo
im using a gskill DDR4-3200mhz (4x8gb kit) previously working okay with XMP settings using my Intel proc. but with this x570 master + 5900x it just refuses to boot at 3200 XMP setting. manually setting it to run 3000 works okay, im still using F31E bios from the Aorus site.
so this F31G bios did wonders for your setup? what is the XMP of your Rams btw?
Right now I'm Offline I have made 7 posts
I joined November 2020
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Updated to the F31H bios just now. still wont accept XMP of my 4x8gb DDR4-3200 Gskill kit lowering mem multiplier to 30, setting it to DDR4-3000 speed pushes on without errors but still, this is the same as with the F31E bios.
Updated to the F31H bios just now. still wont accept XMP of my 4x8gb DDR4-3200 Gskill kit lowering mem multiplier to 30, setting it to DDR4-3000 speed pushes on without errors but still, this is the same as with the F31E bios.
What happens if you turn off XMP and just set the multiplier to 32? I ask because when XMP refused to work on these 31x bioses ironically 3733Mhz ran perfectly when XMP was turned off and the multiplier set for 37.33. You might wish to try that just to see if your ram will run correctly with the XMP multiplier and XMP turned off...sounds counterintuitive, but it worked for me.
My Signature... Windows10x64 Pro v2004, build 21296.1000 AMD 50th Anniversary 5700XT Aorus Master x570 F32 Corsair HX-850 PSU (72a x1 12v rail) AMD Ryzen 9 3900X RAM 32GB 4x8GB, Patriot Viper Steel @ 3733MHz @1.35v LG MultiDrive DVD writer Boot: Samsung 980 Pro 500GB PCIe4 Samsung 960 EVO NVMe 250GB 2x 1TB WD Blue 7200 rpm ST2000DM SATA 3 2TB ST4000DM004 S3 4TB Wired Ethernet 105Mb/s BenQ EW-3270U 4k, HDR10 monitor
Right now I'm Offline I have made 7 posts
I joined November 2020
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Okay sir will try that. then just manually input Timings and RAM voltage right? do i need to add SOC, vddo and vddp voltages as well? im just aiming for DDR4-3200 C16 speeds
Okay sir will try that. then just manually input Timings and RAM voltage right? do i need to add SOC, vddo and vddp voltages as well? im just aiming for DDR4-3200 C16 speeds
None of that--just turn off XMP in the bios, and set the multiplier for what you want, save, and reboot. Leave all the voltages alone. Worked for me every time--hope it helps.
My Signature... Windows10x64 Pro v2004, build 21296.1000 AMD 50th Anniversary 5700XT Aorus Master x570 F32 Corsair HX-850 PSU (72a x1 12v rail) AMD Ryzen 9 3900X RAM 32GB 4x8GB, Patriot Viper Steel @ 3733MHz @1.35v LG MultiDrive DVD writer Boot: Samsung 980 Pro 500GB PCIe4 Samsung 960 EVO NVMe 250GB 2x 1TB WD Blue 7200 rpm ST2000DM SATA 3 2TB ST4000DM004 S3 4TB Wired Ethernet 105Mb/s BenQ EW-3270U 4k, HDR10 monitor
You can also try our discord if you need help. Link at the bottom of my signature.
I installed f31L last night and everything has been perfectly stable for me so far on my master. Memory worked with xmp enabled (4x8) and I tweaked the timings to 14-17-17 so I am pretty happy with it so far. Played some games last night without issue. Will try and run some benches today and see if anything changed.
My Signature... I do not work for gigabyte. My advice and opinions are my own.
I installed f31L last night and everything has been perfectly stable for me so far on my master. Memory worked with xmp enabled (4x8) and I tweaked the timings to 14-17-17 so I am pretty happy with it so far. Played some games last night without issue. Will try and run some benches today and see if anything changed.
Must be close to F31 final by now, soooo many betas for this BIOS
skizzdog wrote: Jan 24, 2021 16:54:39 GMT -8 Hello I just built a pc using the Gig Z390 M Gaming board.I cannot figure out what drivers to load first.Idont have the CD that came with the board.Can i buy one some place.
arvindh wrote: Jan 22, 2021 18:49:37 GMT -8 Hi,im having 3HD(win10 & Mint) on Aorus B450.now want to install 4th HD with debian10.Is my current setup legacy/UEFI? what care should i take before installing 3rd OS on 4th HD.forum.gigabyte.us/thread/11477/b450-multiboot-legacy-uefi*
razor9103 wrote: Jan 22, 2021 12:00:23 GMT -8 New Z490 Vision D won't boot ... stuck at RED CPU error LED
lima567 wrote: Jan 20, 2021 15:13:51 GMT -8 intender thank you, will try doing that.
masc2279 wrote: Jan 20, 2021 10:45:24 GMT -8 polarox - need more info what board what block version ... I can tell you that I have the EKWB EK-Quantum Momentum TRX40 Aorus Master Monoblock and that block is worth every penny i went thru 3 different solutions and this one is insanely good.
polarox wrote: Jan 20, 2021 8:03:32 GMT -8 hi guys,
does anyone have the bitspower or EK monoblock for this motherboard? Is it worth the money?
intender wrote: Jan 19, 2021 11:55:39 GMT -8 lima567 this is a windows 10 20h2 issue. I had the same thing on one of my computers. I was never able to get logged back into my account on that PC. I moved that drive to another computer and copied over all data I wanted to keep and did a clean install.
joeym wrote: Jan 19, 2021 8:52:33 GMT -8 Is Asus working on a solution for the Intel 300 series?
lima567 wrote: Jan 18, 2021 20:02:50 GMT -8 Have issue “Something happened and your PIN isn’t available. Click to set up your PIN again.” (I disabled start up applications. Trying to get to save mode, when press F12, chose Windows boot, hit enter - gets me back to sign in page. Please help
sozehh wrote: Jan 18, 2021 13:42:41 GMT -8 soooo NOW ASUS is working on resizable bar too....GIGABYTE?
sozehh wrote: Jan 16, 2021 10:58:58 GMT -8 joeym ofc i've done it, signed and trying to spread the petition, gigabyte do your work please and add resizable bar for intel 300 series, it is not an old product, people like me spent 800 euros on aorus xtreme, don't tell me i have already an outdated mb
joeym wrote: Jan 16, 2021 7:15:27 GMT -8 I would strongly recommend that anyone who hasn't already signed the petition do so now. If you already signed it, please share it! This may help encourage all other motherboard manufacturers to follow suite. Link to the petition: chng.it/LKLksG4yQv
iuliug wrote: Jan 15, 2021 16:31:07 GMT -8 Yes ADD BAR support for all boards that support it - but GB will ignore this
vigo wrote: Jan 15, 2021 9:35:47 GMT -8 what is resizable BAR ?
desaccorde wrote: Jan 15, 2021 0:50:15 GMT -8 300 Series MUST be supported, no other way. MSI supports it. They may think they're pushing their customers for a premature upgrade, but guess what? Even if I upgrade, I wouldn't buy a Gigabyte board. Me and all my close friends will never buy Gig again.
johnyb0y wrote: Jan 14, 2021 4:58:11 GMT -8 @gigabyte, I've personally built with half a dozen of your boards and recommended you at least 5 times last year. This will stop if you screw Z390 users with not supporting Re-BAR.*
mezzer wrote: Jan 14, 2021 2:23:19 GMT -8 This will be my last gigabyte mobo if there's no resize bar support on 300 series.
lowering mem multiplier to 30, setting it to DDR4-3000 speed pushes on without errors but still, this is the same as with the F31E bios. 
