Nov 10, 2020 14:22:09 GMT -8

Reply Quote | Like

Diesto
Guest

MB: X570i Aorus Wifi
PSU: Corsair SF600 Gold 600W
RAM: G.Skill Trident Z Silver/Red DDR4 3600MHz 2x8GB
SSD: Adata XPG SX8200 Pro 1TB
CPU: AMD Ryzen 5600x
GPU: RTX 3070

Just bought a new build and when trying to boot for the first time, no display is shown and I cant access BIOS. When powering on, the front intake fan, cpu fan and gpu fans are spinning, and the RGB on the keyboard is lit before I have pressed the power button.

I have tested 2 CPUs (3600 and 5600x). Tried all RAM slot combinations (one ram stick). Tried booting without SSD as I read the Adata could be the issue.

Could it be that I need to flash the BIOS or something? Faulty MB?

Really appreciate any help!

Nov 10, 2020 15:14:06 GMT -8

Reply Quote | Like

Diesto
Guest

I tried to flash BIOS and it did not work. Also it is not possible to shut down PC holding down power button. I have to cut the power.

Nov 16, 2020 7:10:26 GMT -8

Reply Quote | Like

Hellpful
Guest

I actually came across the same issue, tried my Aorus X570i with both a 3600 and a 5600x, nothing booted up, everything span up and powered on but no display. I had a 2200g from another build, installed it and that powered right on, even using the GPU so idk what the issue is, the 3600 works, that booted on my Asus x470i strix. I think the best bet is so send this back with an RMA.

skizzdog wrote: Jan 24, 2021 16:54:39 GMT -8
Hello I just built a pc using the Gig Z390 M Gaming board.I cannot figure out what drivers to load first.Idont have the CD that came with the board.Can i buy one some place.

arvindh wrote: Jan 22, 2021 18:49:37 GMT -8
Hi,im having 3HD(win10 & Mint) on Aorus B450.now want to install 4th HD with debian10.Is my current setup legacy/UEFI? what care should i take before installing 3rd OS on 4th HD.forum.gigabyte.us/thread/11477/b450-multiboot-legacy-uefi *

razor9103 wrote: Jan 22, 2021 12:00:23 GMT -8
New Z490 Vision D won't boot ... stuck at RED CPU error LED

lima567 wrote: Jan 20, 2021 15:13:51 GMT -8
intender thank you, will try doing that.

masc2279 wrote: Jan 20, 2021 10:45:24 GMT -8
polarox - need more info what board what block version ... I can tell you that I have the EKWB EK-Quantum Momentum TRX40 Aorus Master Monoblock and that block is worth every penny i went thru 3 different solutions and this one is insanely good.

polarox wrote: Jan 20, 2021 8:03:32 GMT -8
hi guys,

does anyone have the bitspower or EK monoblock for this motherboard? Is it worth the money?

intender wrote: Jan 19, 2021 11:55:39 GMT -8
lima567 this is a windows 10 20h2 issue. I had the same thing on one of my computers. I was never able to get logged back into my account on that PC. I moved that drive to another computer and copied over all data I wanted to keep and did a clean install.

joeym wrote: Jan 19, 2021 8:52:33 GMT -8
Is Asus working on a solution for the Intel 300 series?

lima567 wrote: Jan 18, 2021 20:02:50 GMT -8
Have issue “Something happened and your PIN isn’t available. Click to set up your PIN again.” (I disabled start up applications. Trying to get to save mode, when press F12, chose Windows boot, hit enter - gets me back to sign in page. Please help

sozehh wrote: Jan 18, 2021 13:42:41 GMT -8
soooo NOW ASUS is working on resizable bar too....GIGABYTE?

sozehh wrote: Jan 18, 2021 13:42:21 GMT -8
www.reddit.com/r/nvidia/comments/l045ct/asus_released_new_beta_bios_firmware_based_on/

onyx wrote: Jan 16, 2021 20:27:21 GMT -8
. *

sozehh wrote: Jan 16, 2021 10:58:58 GMT -8
joeym ofc i've done it, signed and trying to spread the petition, gigabyte do your work please and add resizable bar for intel 300 series, it is not an old product, people like me spent 800 euros on aorus xtreme, don't tell me i have already an outdated mb

joeym wrote: Jan 16, 2021 7:15:27 GMT -8
I would strongly recommend that anyone who hasn't already signed the petition do so now. If you already signed it, please share it! This may help encourage all other motherboard manufacturers to follow suite. Link to the petition: chng.it/LKLksG4yQv

iuliug wrote: Jan 15, 2021 16:31:07 GMT -8
Yes ADD BAR support for all boards that support it - but GB will ignore this

sozehh wrote: Jan 15, 2021 10:03:18 GMT -8
vigo www.nvidia.com/en-us/geforce/news/geforce-rtx-30-series-resizable-bar-support/

vigo wrote: Jan 15, 2021 9:35:47 GMT -8
what is resizable BAR ?

desaccorde wrote: Jan 15, 2021 0:50:15 GMT -8
300 Series MUST be supported, no other way. MSI supports it. They may think they're pushing their customers for a premature upgrade, but guess what? Even if I upgrade, I wouldn't buy a Gigabyte board. Me and all my close friends will never buy Gig again.

johnyb0y wrote: Jan 14, 2021 4:58:11 GMT -8
@gigabyte, I've personally built with half a dozen of your boards and recommended you at least 5 times last year. This will stop if you screw Z390 users with not supporting Re-BAR. *

mezzer wrote: Jan 14, 2021 2:23:19 GMT -8
This will be my last gigabyte mobo if there's no resize bar support on 300 series.