Right now I'm Offline I have made 33 posts
I joined September 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
I see, I see, I have an EVGA G5 1000, and it has x2 CPU connections, both are 8x capable, so which 4x do I leave out of the loop for the x4 ATX? Actually, this much turns out to be pretty easy to figure out, both are keyed, and there is only one side that will fit the m/b 4x connector.
Edited Sept 19, 2020 14:42:20 GMT -8 by mwpowelllde
Right now I'm Offline I have made 33 posts
I joined September 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Hmm, reading a couple of other blogs of similar user experiences, different motherboards, same code, their experience seems to be RAM related. I do not relish the thought of this because I have a bequiet Dark Rock Pro TR4 fully installed at this point, and the path to RAM is very much obstructed.
When I installed the RAM, I did not get a "click" in all cases, but I did verify the seating seemed good, the latch either caught with a click or a thump, so I am pretty confident that the tab was locked and seated firmly in place.
Error codes bouncing between 16 and 3E, no screen, not even getting that far.
Right now I'm Offline I have made 1,253 posts
I joined January 2020
I've received 115 likes
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
You don't state which motherboard you have. I checked the Designare and your ram is on the QVL support list, so I presume that part is fine.
You didn't mention clearing CMOS, which is necessary with a new board before trying to start. Go ahead and do that according to your manual.
The code 16 is Pre-Memory System Agent initialization. Dr. Debug states this about your 16 code: "Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules."
If you didn't get a click when installing the ram and you don't see the ram locks in the up position, then they are not installed correctly. If they are fully installed, your CPU/socket may have bent pins or thermal paste flowed into the socket, or the cooler is tightened too much, etc.
The 3E means the chipset cannot be initialized and that's likely because it can't get past or accept the memory or CPU problem.
Right now I'm Offline I have made 33 posts
I joined September 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Wow duh case of user error reading the documentation. Got my X marks confused with check marks for RAM channel slots. It is a good time to reapply the thermal compound as well... Thanks so much!
Right now I'm Offline I have made 33 posts
I joined September 2020
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
That was it, changed RAM slots and all is well, posted, BIOS did recover and was updated. Also a good opportunity to better apply thermal compound after cleaning both surfaces with rubbing alcohol.
philuk11 wrote: Apr 19, 2021 1:40:21 GMT -8 Found i needed to install the software from C: drive
philuk11 wrote: Apr 18, 2021 23:21:36 GMT -8 How do i get round the 'Windows cannot find 'C:\Users\xxx\AppData\Local\Temp\N3080VO.F3.exe'. Make sure you typed the name correctly, and then try again' *
hardcoregames wrote: Apr 16, 2021 17:52:21 GMT -8 what make/model of RAM do you have?*
toriga wrote: Apr 14, 2021 10:06:56 GMT -8 Somebody have tried PBO2 with 5900x (BIOS F33I)
Can you say your settings? I cant find stable settings.
kamiccolo wrote: Apr 13, 2021 15:53:41 GMT -8 Why is gigabyte support not replying to my questions? I submitted a question a week ago and no reply.
kamiccolo wrote: Apr 13, 2021 14:10:05 GMT -8 Why are you limiting my 3090 to 360w??
amchess wrote: Apr 13, 2021 12:29:32 GMT -8 Motherboard: GA-X99-Gaming 5 My cpu Intel® Xeon® E5-2699 v4 has a base fequency 2.20 Ghz, but CPUz shows it's working at 2.0Ghz.What I have to set in the bios to reach the correct base frequency? The multiplier is at 20.
agentx wrote: Apr 13, 2021 8:23:51 GMT -8 I'm getting the same error please help my bios is up to date.
barrybondz wrote: Apr 12, 2021 18:07:25 GMT -8 Anyone with a gigabyte board ever get a LAN error code 10? randomly? Z590 in my case. Clean install newest drivers ect.
luke007 wrote: Apr 12, 2021 13:19:48 GMT -8 Hello, is my GPU ok (RTX 3090 Gaming OC) as I know older revisions had stability issues and bad pins connecting to PSU, but my GPU has SN starts with 2106 so it's manufactured in 6 week of 2021 year, as I heard latest revisions from this year should be ok?*
kshipper wrote: Apr 11, 2021 10:32:54 GMT -8 snibblex: Take a look at BIOS update for that board. Later updates do address RAM issues*
snibblex4 wrote: Apr 11, 2021 10:27:22 GMT -8 would an update to Ryzen 7 3700X fix that ram-underclocking weakness?
snibblex4 wrote: Apr 11, 2021 10:26:25 GMT -8 Hey all, got a X370 Gaming 5 with Ryzen 7 1700. My RAM (4 x G.Skill Trident 3200 with Samsung chips) are only working at 1866 MHz. Cant activate XMP 2.0, because mobo resets the timings to standard, if i do.
wbloon wrote: Apr 10, 2021 14:46:58 GMT -8 Essentially a new build: MB: Gigabyte Aorus Ultra CPU: AMD Ryzen 5600X RAM: 4x8=32GB Two 1Tb M.2 NVMe SSD PCIe 4.0
Plan was to configure the two SSDs, in RAID 1, as the new “C” drive. Was able to get into BIOS on first few attempts but the Gigabyte manua
greggg wrote: Apr 9, 2021 15:00:14 GMT -8 Can anyone tell me the secret to getting gigabyte repair service to answer my attempts at contacting them? I want an X470 aorus board fixed ( cannot install windows) and am willing to pay for the work but I cannot connect with I guess, gigabyte...central
toriga wrote: Apr 9, 2021 10:43:19 GMT -8 From when i installed F33, i have my headset wireless of logitech that disconnect every 2 minutes and wifi that disconnect every 1 hour. Today i installed F33I and now my AUDIO CRACKLING. GYGABYTE FIX YOUR BIOS, I PAID MORE OF 400 EUR FOR THIS MOTHERBOARD.*
kshipper wrote: Apr 4, 2021 20:34:45 GMT -8 belmonte: Estoy usando el traductor de Google para comprender lo que me pregunta. ¿Cómo podemos ayudar?
belmonte wrote: Apr 2, 2021 1:34:40 GMT -8 Deseo presentarme pero es imposible escribir un post.
belmonte wrote: Apr 2, 2021 1:34:16 GMT -8 No puedo escribir, soy nuevo y necesito ayuda por favor, soy cliente de hace muchos años de Gigabyte y Fan.
