Using 4750G B550M I also had this issue across Windows Linux and using multiple drivers and kernels, using 2 sets of RAM, using XMP and disabling it. The only thing managed to resolve the issue was setting the vcore soc -> 1.05 Thank you so much!
I had the same problem, pc freezes with any 3D intensive app since I bought it I disabled gpu speed auto mode and forced the igpu speed to 2100mhz in the bios and the freezes stopped, max I can go without freeze is 2120mhz CPU is 4750g, mobo is ASUs prime b550m-k Memory Corsair value 2400mhz It’s the base package from xenta
The solution that seems to be working (and I tried a lot!!!) is to keep XMP profile 1 but at the same time, set the dram voltage and multiplier to its intent manually (the same as XMP profile but needs to be set manually!).
Also, I use channels A2 and B2...
This was the only way to solve it with latest bios for me.
skizzdog wrote: Jan 24, 2021 16:54:39 GMT -8 Hello I just built a pc using the Gig Z390 M Gaming board.I cannot figure out what drivers to load first.Idont have the CD that came with the board.Can i buy one some place.
razor9103 wrote: Jan 22, 2021 12:00:23 GMT -8 New Z490 Vision D won't boot ... stuck at RED CPU error LED
lima567 wrote: Jan 20, 2021 15:13:51 GMT -8 intender thank you, will try doing that.
masc2279 wrote: Jan 20, 2021 10:45:24 GMT -8 polarox - need more info what board what block version ... I can tell you that I have the EKWB EK-Quantum Momentum TRX40 Aorus Master Monoblock and that block is worth every penny i went thru 3 different solutions and this one is insanely good.
polarox wrote: Jan 20, 2021 8:03:32 GMT -8 hi guys,
does anyone have the bitspower or EK monoblock for this motherboard? Is it worth the money?
intender wrote: Jan 19, 2021 11:55:39 GMT -8 lima567 this is a windows 10 20h2 issue. I had the same thing on one of my computers. I was never able to get logged back into my account on that PC. I moved that drive to another computer and copied over all data I wanted to keep and did a clean install.
joeym wrote: Jan 19, 2021 8:52:33 GMT -8 Is Asus working on a solution for the Intel 300 series?
lima567 wrote: Jan 18, 2021 20:02:50 GMT -8 Have issue “Something happened and your PIN isn’t available. Click to set up your PIN again.” (I disabled start up applications. Trying to get to save mode, when press F12, chose Windows boot, hit enter - gets me back to sign in page. Please help
sozehh wrote: Jan 18, 2021 13:42:41 GMT -8 soooo NOW ASUS is working on resizable bar too....GIGABYTE?
sozehh wrote: Jan 16, 2021 10:58:58 GMT -8 joeym ofc i've done it, signed and trying to spread the petition, gigabyte do your work please and add resizable bar for intel 300 series, it is not an old product, people like me spent 800 euros on aorus xtreme, don't tell me i have already an outdated mb
joeym wrote: Jan 16, 2021 7:15:27 GMT -8 I would strongly recommend that anyone who hasn't already signed the petition do so now. If you already signed it, please share it! This may help encourage all other motherboard manufacturers to follow suite. Link to the petition: chng.it/LKLksG4yQv
iuliug wrote: Jan 15, 2021 16:31:07 GMT -8 Yes ADD BAR support for all boards that support it - but GB will ignore this
vigo wrote: Jan 15, 2021 9:35:47 GMT -8 what is resizable BAR ?
desaccorde wrote: Jan 15, 2021 0:50:15 GMT -8 300 Series MUST be supported, no other way. MSI supports it. They may think they're pushing their customers for a premature upgrade, but guess what? Even if I upgrade, I wouldn't buy a Gigabyte board. Me and all my close friends will never buy Gig again.
johnyb0y wrote: Jan 14, 2021 4:58:11 GMT -8 @gigabyte, I've personally built with half a dozen of your boards and recommended you at least 5 times last year. This will stop if you screw Z390 users with not supporting Re-BAR.*
mezzer wrote: Jan 14, 2021 2:23:19 GMT -8 This will be my last gigabyte mobo if there's no resize bar support on 300 series.