anyone managed to get Wake On LAN working on this board (preferably from S5 power state)? I can't seems to find any option in BIOS (F4) concerning power states and consequently when I shutdown my PC the onboard LAN get no power at all (stops blinking). If there are really no power state options in current BIOS, will it ever get it with updates?
This board is very disappointing, I'm having issues with it, BIG TIME right now. I don't understand what the issue is with the memory but I'm on my second board right now and I keep running into this boot loop problem. I can't even get it to POST. I set the XMP profile of my memory, from corsair and this is what happens. I actually originally had EVGA memory from Microcenter and ending up spending more money and buying and the problem still persists on both motherboards. Is this ever going to be fixed???
It's funny because I actually was using this board since release and the problem started to rear its head in just recently.
Funny I actually solved my own issue right after posting my last post. Seems to be an issue with the motherboard and having an M.2 drive installed when trying to post when ram speed setting aren't working. With it installed I got locked into a boot loop and couldn't even access the bios. I removed my M.2 drive and it my motherboard was able to post. This really needs to be fixed. I'm going to try bios F6D again on THIS board.
Can anyone from Gigabyte let us know what kind of fixes can we except from next bios update? I'm getting kind of tired of messing around with this board, trying to find stable settings, especially for RAM.
Now with BIOS F5 I'm getting ramdom boots (computer shuts down suddenly but leaves motherboard and PC case lights on, I have to unplug cable or switch during 4 or more seconds, after reboot all fans start at full speed indicating some temperature problem) and ramdom lag and stuttering when playing Battlefield 1 and any game that streess CPU a lot (game it's unplayable during almost 30 seconds and then gets back to a seminormal state, little stuttering and lagginess from time to time, and CPU temperature raises suddenly 10 degrees to about 70 Celsius, then revert back to 60 degreess and again happens if a ramdom boot does not happen first).
AUTO settings for RAM and is set to 2133Mhz (my RAM is G.Skill Trident Z capable of 3200 Mhz and 14 CAS but in AUTO setting in BIOS revert to 2133Mhz)
Graphics card is a Sapphire Radeon RX 480 8GB OC
Muy CPU is a Ryzen 1700X
No overclock, everything is set to AUTO and loaded optimiced defaults.
Please could anybody from Gigabyte give feedback on this?
Right now I'm Offline I have made 19 posts
I joined March 2017
My gender is Male
I currently have no messenger contact information filled out.
I currently have no social network information filled out.
Hello guys. I have a problem with my RAMs on my AB350 Gaming 3.
I can manage to boot with XMP profile (3200mhz - Cas16 - 1,350v), but unfortunately they are not stable). So i'm trying to set them at 2933mhz or 2667mhz but this won't work. RAMs will be set at 2133mhz default and nothing more, even changing manually the multiplier. Weird.
They go over 2133mhz just when i activate XMP profile. My BIOS is F5, CPU 1700X and the ram is Corsair Vengeance LED CMU16GX4M2C3200C16.
I'm able to use my 3200 RAM (G.SKILL TridentZ optimized for Intel, CL16) without any issue :
DO NOT USE THE XMP PROFILE (Except if you want to be stuck in a reboot loop for 3 hours trying to resurrect the board.
What I did (after reviving the board): * Manually set the timing for both channel, mine say 16-18-18-38 on the box so I did put 16-18-18-18-38 (a 18 for the missing one) * Add 0.0025V to the CPU and about the same for SOC * My RAM was rated for 1.35V but it have good heatsink so I did put 1.40v
No problem what so ever. - Without increasing ram voltage, no boot - Without increasing cpu voltages, it randomly blackscreen and reboot.
Ok so I was able to my Corsair LED Kit (same kit as the person two posts before) and I'm only able to 2667mhz 16-18-18-18-36 out of it and not the 3200mhz speed it was tested to work at. Even upping the SOC voltage to 1.4v (DIMM) and SOC voltage up to +0.196 wouldn't help it boot at 3200mhz.
I hope there's a fixing coming very soon because there is definitely a bump in gaming performance with the memory being faster. I had it boot at 2933MHz once and gained a few more FPS in every game I tested but it wasn't stable and computer locked up (at least at stock voltages). There is definitely more performance to be had at the 3200Mhz speed and I would very much like to have that, I mean that's what I bought it for lol.
absolutepro wrote: Jan 17, 2018 20:09:13 GMT -8 I just ordered the Z370 Gaming Wifi board and am going to put 2 Samsung 960 EVOs in it. Has anyone seen a video on setting up RAID 0 on a Gigabyte board?*
fakaa wrote: Jan 17, 2018 11:29:41 GMT -8 Hi i have one question. I Want to know if the is any TPM CHIP WITH PCIe Connector. Thank you
shemphoward wrote: Jan 17, 2018 11:25:23 GMT -8 Just installed a GA-Z270XP-SLI OS runs fine, but computer is really slow booting and Both my WD SATA digital drives are constantly starting and stopping. I have 2 (32GB) of DDR4 in slots 1 & 2 and 32GB OPTAME memory. Any Ideas why this is happening?
capt1701a wrote: Jan 16, 2018 7:56:19 GMT -8 fadingsanity, I have tried this link and it download the files for the bios upgrade fine
tbouvier09 wrote: Jan 15, 2018 12:03:52 GMT -8 anyone has a probleme with gv-n1070wf2-8gd. When i try to compute with i have a very low hashrate. DO you guys know a fix for it ? The card perform as a 1050 ...
fadingsanity wrote: Jan 15, 2018 9:36:50 GMT -8 Nevermind, one of the links ended up working.
fadingsanity wrote: Jan 15, 2018 9:07:43 GMT -8 Trying to upgrade bios on a z170x-Ultra Gaming, but all the links leading to the latest bios are dead. Anyone able to share bios version F23h?
charles4691 wrote: Jan 14, 2018 20:00:18 GMT -8 Is anyone else having issues flashing F22d to F22f? I keep getting the " file cannot be read"
divinewrath wrote: Jan 12, 2018 15:17:43 GMT -8 anyway to sync gigabyte motherboard and gpu to color sync and color cycle? Doesn't look good when my 1080 xtreme is a different color from my z270x gaming 7 while doing color cycle, only way to match them so far is static color option.
lasher wrote: Jan 12, 2018 10:45:44 GMT -8 latest bios fixes spectre on gaming 9
iwillforget wrote: Jan 11, 2018 13:51:25 GMT -8 bios update problems anyone... going msi next time, no problems.*
wronz wrote: Jan 11, 2018 4:37:48 GMT -8 Has anyone had problems with audio on mobo ga-p55m-ud2?
butadol wrote: Jan 10, 2018 19:19:33 GMT -8 Hey all! Anyone on that is running a Z370 Gaming 7 and a 8700k?
hjames wrote: Jan 10, 2018 17:59:27 GMT -8 Does anyone know a processor that is compatible with GA-AM1M-S2H mother board and a Nvidea 1060 6GB gfx card? My Sempron 3850 is not good enough to run it... please Help.
alexandrecollaco1 wrote: Jan 10, 2018 16:48:47 GMT -8 Hi, Anyone know how to setup a bootable NVME Raid on the x399?
tyuper wrote: Jan 9, 2018 3:04:31 GMT -8 mach5, thank you for providing this link!