Hi Gigabyte Gurus in here,
I built up this new 9900K based system, returning to Gigabyte brand from another brand after two years and the motherboards performs beautifully when it comes to temp and overclocking. But using the 5v D_LED RGB headers simply will not change the colour that I want to set in me EK Velocity DRGB strip which is a 5V addressable strip. Sometimes it will be GREEN, sometimes it will be BLUE and at one time it will show up as RED or PURPLE as I keep on trying to make it work with the RGB fusion software by clicking on the colour circle everywhere. And if I try to calibrate, say if GREEN is the colour I see in the Velocity block, so in calibration step I click GREEN, but after that I don't get the option to select the BLUE and RED Colours next. This is as if at any time only one of the RGB pins are working, either the RED, or GREEN or BLUE. Although at one time I did get PURPLE. Any solution to this please ? If I do switch the PC off completely and even turn off the power, I have seen that the colour sometimes ( not all times ) change completely, example from BLUE to GREEN etc. Any ideas who to make this work ? Here you can see how my Velocity Block is stuck in BLUE colour although I have tried to set everything else in PURPLE using RGB Fusion. The BIOS is the latest F8E BIOS.