Aug 13, 2017 19:12:15 GMT -8

Reply Quote | Like

	insane	Right now I'm Offline I have made 10 posts I joined August 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Hello all, I recently got my new rig running with this Mobo and a 7820x cpu. I'm loving it so far, but I had a question about my M.2 PCIe SSD. I used the GC-PClex4 device to connect my 960Pro 1TB into the PCIexpress slots. I'm wondering if this is a mistake and I should instead use the GC-M2_U2 slots directly on the motherboard. Will this increase my speeds of read/writes or will it be similar?

If it matters, I'm only currently running 1 EVGA 970 GPU and will be upgrading eventually to a 1080.

Thanks for the info!

Aug 14, 2017 2:31:36 GMT -8

Reply Quote | Like

	uplink	Right now I'm Offline I have made 267 posts I joined July 2017 I've received 14 likes	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.
desperate because of X299 chipset architecture

Greetings

According to the designers of the board, the middle one is connected directly to the CPU. Though, I can't confirm it, I'm using only PCi-e ports that connect my three NVMe drives directly to the CPU.

Aug 14, 2017 15:00:29 GMT -8

Reply Quote | Like

	insane	Right now I'm Offline I have made 10 posts I joined August 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Thanks for the reply, I wonder if any on the Gigabyte techs have more info on this?

Aug 18, 2017 8:21:04 GMT -8

Reply Quote | Like

	faikius	Right now I'm Offline I have made 20 posts I joined August 2017	My gender is Male	I currently have no messenger contact information filled out.	I currently have no social network information filled out.

Aug 13, 2017 19:12:15 GMT -8 insane said:

The recommended placement for PCIe NVMe drives is either the M2M_32G M.2 Slot on the board (between the PCIe 1/2 slots) or PCIe slots PCIEX4_1, PCIEX8 via the riser card that came with the board. All will perform the same.

Edited Aug 18, 2017 8:21:46 GMT -8 by faikius

bigdave wrote: May 21, 2019 17:09:57 GMT -8
cudam, Please post your issue on the forum under the appropriate topic area.

cudam wrote: May 21, 2019 10:38:57 GMT -8
Hi friends. Please help me.

shyler wrote: May 21, 2019 2:54:36 GMT -8
Updated the B450 Elite to F40. Writes that AGESA version became 1.0.0.2. Will it remain so?

japr19gb wrote: May 17, 2019 21:01:50 GMT -8
Lot of confusion reference Gigabyte App Center and RGB Fusion is junk, not work etc., That is not true. To install Windows 10 Pro /Windows 10 as GPT and not MBR, (MBR limits your abilities), do the following, start with a new SSD or HDD, or just overwrite

desperado wrote: May 17, 2019 16:42:17 GMT -8
I bought one of the Z390 Aorus Master and if I had read these comments before I would NEVER have bought this board, for the amount of money compared to my previous Aorus Gaming boards eg Z370 I am so disappointed. Most APPS do not work, CMOS settings lost

romeo143211 wrote: May 13, 2019 12:04:31 GMT -8
crptyk it refuses to install on my system (fresh install of windows and have all app center apps except turbo charger) i get this error "Error:-1605 This action is only valid for products that are currently installed"

crptyk wrote: May 12, 2019 20:29:46 GMT -8
@ romeo143211, yes, can confirm Fast Charging works. Installed USB TurboCharger B19.0227.1 in App Ctr B19.0227.1 and it correctly works charging Android phone. App opens when the phone is plugged in; phone switches to 'charging on AC' when plugged in

romeo143211 wrote: May 12, 2019 16:59:02 GMT -8
Has anyone got the Fast Charging (On off Software) to actually Install!?!? i'm on the z390 master and thats one of the reasons i bought that board so my pc would have quick charge capability....

reddorki wrote: May 11, 2019 2:25:43 GMT -8
intender ... correct people, aka Gigabyte. Or we will start to push changes inside Gigabyte with to only weapon we haven, our wallets, so they end up on the pile of failed companies. We give you our money, you provide us a correct service or you're out.

reddorki wrote: May 11, 2019 2:23:15 GMT -8
intender Other motherboard manufacturors are able to put down a good & stable Bios from the start, which requires little to none updates, even when it's a new platform. So, do us a pleasure and direct your displeasure with disgrunted costumers to the ...

reddorki wrote: May 11, 2019 2:19:09 GMT -8
intender Public Notice: It's ok to accept our money, but it ain't ok to accept it for broken products due to broken software. You're issue is known for years, but the real fix aka software engineers who know their stuff, isn't in sight ...

schrotty wrote: May 8, 2019 20:17:58 GMT -8
Why is the z390 Designared so neglected if it belongs to expensive boards?

bigdave wrote: May 8, 2019 8:02:18 GMT -8
street0123, The system board form factors (sizes such as ITX and ATX) are different. *

street0123 wrote: May 8, 2019 5:25:59 GMT -8
Went on Gigabyte support website to make sure I had the latest drivers and Bios for my new build - Z390 AORUS PRO WIFI (rev. 1) and there are two different support sites for this motherboard? Z390 | AORUS PRO WIFI (rev. 1) and Z390 AORUS PRO WIFI (rev. 1)

intender wrote: May 6, 2019 19:19:57 GMT -8
Public Notice: I havn't had to deal with these problems in quite a while but I have seen it a few times in the last couple of weeks. Please keep it civil.

intender wrote: May 6, 2019 19:14:52 GMT -8
Public Notice: You are free to express your displeasure with your products, software, bios or purchases here on this forum. However extreme language and threats will not be tolerated.

Lelzu wrote: May 2, 2019 17:38:58 GMT -8
Meh, first time GB mobo and I already know it's last one

sukh wrote: May 2, 2019 10:25:19 GMT -8
zepmac i just installed with 32gb ram no issues.

chitchou wrote: Apr 30, 2019 19:58:56 GMT -8
hello, someone s there?

zepmac wrote: Apr 30, 2019 18:24:17 GMT -8
Anyone else having issues booting up with 32gigs of ram on the board? I'm getting error codes c1-c5.